Hedbox RP-DC200V | V-Mount Chargeur quad

HBRP-DC200V
395,00 €
Aucune taxe

RP-DC200V 4-ch Digital Simultaneous Battery Charger with Power Bank Function
The RP-DC200V is a digital quad battery charger conveniently charged for professional V-Mount batteries simultaneously. Using the latest battery charging technologies, with zero-volt charging activation, allows you to charge for batteries at the same time saving you both time and money. Intelligent charging systems integrate the control systems within the charger and the electronics within the battery to allow precision control over the charging process. As a safety precaution with high-capacity batteries, a pre-charging stage (trickle charge) is used. Constant current/constant voltage (CC/CV) charging mode is an effective way to charge lithium batteries.

Quantité
Derniers articles en stock

It is used to charge the battery from 0% to 80% (RED light ON). When the battery is charged to 80%, impulse voltage charging (GREEN Light ON) takes over until the battery reaches 100%. The charger CPU automatically adjusts the charging current to be lower than the max charging current that the battery can accept. When the battery is fully charged, this state is stopped.

FULL LED Display Screen
LED display provides a clear, accurate, and precise display of power status, charging status, battery channel status, and power bank mode of all 4 Channels. The displayed charging mode (Adapter UPS LED Light ON) provides a clear insight into which channel (CH1, CH2, CH3, or CH4) of the power bank mode is active. With a bright and intense light, the readout function is enabled in the dark.

DC Out 16.5V / 4.5A
With a 4-pin XLR female connector on the front panel, the RP-Dc200V charger provides extra DC output for supplying constant power to external units like professional camcorders, video monitors, LED lights, and other professional broadcast products. Connected with specially designed Hedbox professional high flexibility power cable RPC-DC4X4-4pin XLR female to male (included in the box), the charger can be used as an AC-DC adaptor of DC 14.5V/4.5A, 75W output.

4-ch Sequential Power Mode
Hedbox RP-DC200V offers a 4-channel sequential power mode. It allows you to work with 1, 2, 3, or even 4 batteries in the system. When using a 2-channel battery for power, the system will use the battery in channel 1 first, and then the battery in channel 2 when it is first discharged. If using full power bank mode in all 4-channel batteries, the system uses all 4 batteries in the system, discharging the batteries in sequences 1 / 2 / 3, and finally the last 4th battery. This method provides an uninterrupted power supply without delay.

Charging Technology
Intelligent Charging Systems of RP-DC200V integrate the control systems within the charger and the electronics within the battery to allow precision control over the charging process. As a safety precaution with high-capacity batteries, a pre-charging stage (trickle charge) is used. Constant current/constant voltage (CC/CV) charging mode is an effective way to charge lithium batteries.

It is used to charge the battery from 0% to 80% (RED light ON). When the battery is charged to 80%, impulse voltage charging (GREEN Light ON) takes over until the battery reaches 100%. The charger CPU automatically adjusts the charging current to be lower than the max charging current that the battery can accept. When the battery is fully charged, this state is stopped.

High-Quality Aluminium V-lock release
Adopting technology that allowed us to use a high-quality aluminum alloy V-lock release, the lock and unlock provide up to 10,000 cycles for a V-mount battery on the plate.

Tech specifications
Model : RP-DC200V Intelligent Quad Digital Professional Battery Charger
AC Power In : AC 110 – 240V, 50/60Hz
Battery Mount : V-Lock and V Mount Battery Plate
Power Consumption : Max 85W (Max)
Power Output 1 : DC 16.8V / 3A Single/Dual Chanel / 2.4A Triple/Quad Chanel Charge
Power Output 2 : DC 16.8V / 3A Single/Dual Chanel / 2.4A Triple/Quad Chanel Charge
Power Output 3 : DC 16.8V / 3A Single/Dual Chanel / 2.4A Triple/Quad Chanel Charge
Power Output 4 : DC 16.8V / 3A Single/Dual Chanel / 2.4A Triple/Quad Chanel Charge
DC Power Out : DC 16.5V / 4.5A / 75W (max)
Power Bank Out : DC 16.5V / 4.5A / 75W (Capacity depends on the total capacity of the installed Battery Packs)
Charging Type : Ni-CD , Ni-MH , Li-Ion
Operating Temperature : –20°C to +45°C (–4°F to +113°F)
Dimensions (WxDxH) : 265 × 103 × 223 mm
Weight : 1.68 Kg
Charging Method : RP-DC200V use advanced Constant Current and Impulse Voltage charging Methods

HBRP-DC200V
3 Produits

Fiche technique

Configuration
Chargeur
Type de batterie
V-Mount

Références spécifiques

ean13
736530981648
mpn
HBRP-DC200V

Contactez-nous

optionnel
Produits associés ( 16 autres produits de cette catégorie )

Expédition vers l'UE

Nous livrons dans toute l'Union Européenne

Boutique B2B

Notre offre s'adresse uniquement aux clients B to B, tous les prix sont hors taxes.

Paiement sécurisé

Paiements en ligne sécurisés

Devis individuel

Envoyez votre demande via le formulaire ou par mail: avgear@avgear.shop