Libec HS-250M | Trépied vidéo avec Tête Fluide

    LIHS-250M
    Prix : 1 100,00 €
    Aucune taxe
    Ventes à l'échelle de l'UE, facturation pour livraisons intracommunautaires exonérée de TVA.
    Hors stock (délai de livraison à confirmer)

    The HS-250M is ideal for handheld camcorders and small-sized cinema cameras.  In order to perfectly match recent trends using smaller & lighter handheld cameras, this model's counterbalance range has been adjusted from existing model RS-250DM.

    Perfect Balance
    Libec's unique continuous perfect counterbalance system enables the camera to perfectly balance at any tilt angle. This smooth balance system makes it a lot easier for users to concentrate on precise camera movements, even when using a telephoto lens at its maximum zoomed position.

    Newly Designed Fluid Head
    From scratch, the fluid head was designed to dramatically reduce play inside its superior pan and tilt drag units, dramatically increasing its longevity. From start to finish, this new fluid head provides ultra-smooth movements and is equipped with many features that enhance a user's experience.

    Counterbalance Meter
    Equipped with a counterbalance meter with the measurement range of 0 to 100. This allows users to glance at the head's minimum/maximum inner spring strength, making camera balances on site a piece of cake.

    Advanced Drag Unit
    The layered metal unit in the drag system ensures operability, durability and reliability. Thanks to the finest silicon grease applied, the advanced drag unit offers smoother starts and ultimately improved backlash control. In addition, the grease provides ordinary pan and tilt movements at a wide temperature range from -40˚C/-40˚F up to +60˚C/+140˚F. The variable 4 step drag pan tilt system features a zero "free" mode option with no friction. Unlike other brand heads, there is no need to store it in its zero "free" mode.

    User Friendly Accessory Port
    Equipped on the fluid head's side, there are 1/4 and 3/8 inch screw holes allowing users to attach an accessory arm to hold monitors, lights and other accessories. Since the holes are located on the base, the payload capacity, center of gravity and front-rear balance of the head are not affected.

    DualHead
    The Dual-head base specification allows for a quick set-up with both 75mm bowl and flat base tripods. The Dual-head base is also compatible with sliders, skater dollies, and photo tripods.

    Double-sided Serrations
    Serrations are equipped on both sides of the head to accommodate an additional pan handle or other accessories.

    Snap ON/OFF Sliding Plate
    The slide plate can be attached and released with just one-touch. Quick and easy setups in the field are easily achieved.

    Highly Compatible Slide Plate
    Slide plate is compatible with Libec's TH-M, TH-X, TH-Z, and NX Series. This industry standard slide plate is also compatible with other brand tripod systems and accessories, allowing users to quickly swap between a wide range of camera supports.

    LED Bubble Level
    The bubble level is equipped with an LED light allowing users to level a tripod head in the dark. In addition, the counterbalance meter is also illuminated.

    Safety Design
    With safety in mind, the tripod legs are carefully designed to prevent users from pinching their fingers when intentionally or unintentionally collapsing their tripod.

    Fluid Head: H25
    Tripod: RT30B
    Spreader: BR-2B
    Large rubber feet FP-2B
    Carrying bag: RC-30

    Specifications
    Counterbalance range 1.7 to 4.5kg / 3.7 to 9.9lb (C.G.100mm)
    Payload 5kg / 11lb
    Counterbalance Perfect Balance
    Continuous Counterbalance with Illuminated Meter
    Pan drag mode Free plus 3 steps
    Tilt drag mode Free plus 3 steps
    Drag system Multilayered Metal Structure
    Tilt angle +90° / -70°
    Temperature range -40°C to +60°C / -40°F to +140°F
    Bubble level Illuminated
    Camera plate Sliding plate compatible with Manfrotto and Sachtler heads
    Sliding range +/-30mm / 1.2"
    Long sliding plate Optional
    Plate attachment 1/4" screw with video pin
    Accessory attachments 1/4" and 3/8" screw holes
    Spare screw 1/4" and 3/8" screws
    Weight 6.0kg / 13.2lb
    Height 81 to 166cm / 31.9 to 65.4"
    Head attachment 75mm bowl
    Pipe material Aluminium
    Section 2-Stage

    LIHS-250M

    Fiche technique

    Type de trépied
    Vidéo
    Capacité max de chargement (kg)
    5
    Hauteur max (kg)
    166
    Diamètre du bol
    75mm
    Épandeur
    Intermédiaire
    Matériel
    Aluminium
    Contrepoids
    Continu

    Références spécifiques

    ean13
    4986397460046
    mpn
    HS-250M

    Contactez-nous

    optionnel

    Commentaires

    Votre commentaire

    Libec HS-250M | Trépied vidéo avec Tête Fluide

    The HS-250M is ideal for handheld camcorders and small-sized cinema cameras.  In order to perfectly match recent trends using smaller & lighter handheld cameras, this model's counterbalance range has been adjusted from existing model RS-250DM.

    Perfect Balance
    Libec's unique continuous perfect counterbalance system enables the camera to perfectly balance at any tilt angle. This smooth balance system makes it a lot easier for users to concentrate on precise camera movements, even when using a telephoto lens at its maximum zoomed position.

    Votre commentaire

    Produits associés ( 4 autres produits de cette catégorie )

    Expédition vers l'UE

    Nous livrons dans toute l'Union Européenne

    Boutique B2B

    Notre offre s'adresse uniquement aux clients B to B, tous les prix sont hors taxes.

    Paiement sécurisé

    Paiements en ligne sécurisés

    Devis individuel

    Envoyez votre demande via le formulaire ou par mail: avgear@avgear.shop