AVMATRIX MSS1611-S |...
1 190,00 €
AVMATRIX MSS1611-S est un switcher matriciel vidéo SDI 16x16 de haute performance, idéal pour les environnements de diffusion et de production. Il...
The Gefen EXT-4K300A-MF-41-HBTLS is a 4×1 Presentation Switcher with HDMI, DisplayPort, DVI, and VGA inputs, along with an L/R analog audio input that accompanies both the DVI and VGA inputs. It features split HDMI/HDBaseT outputs, and a de-embedded analog L/R audio output. The 4 inputs can be switched automatically or manually. Control options include the front panel, a hand-held IR remote, electrical IR, RS-232, and contact closure. The split HDMI and HDBaseT outputs can simultaneously feed a local and a remotely-installed display, adding flexibility in larger presentation environments.
This 4×1 Switcher and its recommended Receiver (the EXT-UHDA-HBTL-RX, sold separately) use the Gefen implementation of the HDBaseT technology to extend the HDMI output of the Switcher up to 230 feet/70 meters at 1080p Full HD and up to 130 feet/40 meters at 4K, using one CAT-5e or better cable. The HDMI and DisplayPort inputs support resolutions up to 4K 60 Hz 4:2:0, with HDCP 2.2 and 1.4. The HDMI input and output, and the HDBaseT output support up to 7.1 channels of highest performance LPCM and HBR (High Bit Rate) lossless digital audio, such as Dolby Atmos®, Dolby® TrueHD, DTS:X, and DTS-HD Master Audio.
The DVI and VGA inputs support resolutions up to WUXGA (1920x1200) and 1080p Full HD. The DVI input also supports HDCP 1.4. A powerful built-in scaler can upscale lower resolution DVI and VGA signals with legacy aspect ratio to widescreen WUXGA or 1080p Full HD, ensuring stunning presentations and smooth switching transitions between the connected AV sources. The 4x1 Switcher features an analog L/R audio de-embedder. The optional Receiver features analog and digital audio (optical and coaxial) outputs. Any or all audio outputs can be connected to sound-reinforcement systems, adding impact and presence to AV presentations. The Switcher features Advanced EDID Management to ensure that sources are best-optimized for the displays in use. The 4x1 Switcher, when used with the optional EXT-UHDA-HBTL-RX HDBaseT™ Receiver, provides 2-way RS-232 and Source-to-Display IR extension, facilitating RS-232 control of A/V sources placed near the Sender unit, and sending IR or RS-232 automation commands to the remote display or another device placed near the Receiver unit. Industry-standard Power-Over-HDBaseT™ technology provides power from the Switcher to the Receiver, over the same cable that extends the video signal. The Switcher and Receiver’s small, ultra-low-profile enclosures can be securely surface-mounted, and conveniently hidden away from sight in the equipment closet or behind the display. Locking HDMI ports on the Switcher & locking power jacks on both units ensure long-lasting and reliable connections.
Features
Automatic switching of the 4 video inputs
Manual switching of video inputs via front panel button, handheld IR remote, electrical IR, or RS-232
Split HDMI and HDBaseT Outputs feed local and remote displays simultaneously
Inputs:
1x HDMI
1x DisplayPort
1x DVI
1x VGA
1x L/R Analog Audio
Outputs:
1x HDMI
1x HDBaseT
1x L/R Analog Audio
Supports up to 340 MHz TMDS clock and 10.2 Gbps data throughput
VGA and DVI feature scaling up to WUXGA (1920 x 1200 at 60 Hz) and 1080p Full HD (60 Hz) with picture adjustment capabilities
DVI input can be associated with the L/R Analog Audio Input or with audio embedded in the video
When used with optional EXT-UHDA-HBTL-RX HDBaseT™ Receiver, extends the HDMI output, outbound IR, and RS-232 over a single CAT-5e:
4K Ultra HD (3840 x 2160 @ 60 Hz, 4:2:0), up to 130 feet/40 meters (8-bit color)
4K Cinema-DCI (4096 x 2160 @ 24 or 30 Hz 4:4:4), up to 130 feet/40 meters (8-bit color)
1080p Full HD (60 Hz) or WUXGA (1920x1200 @ 60 Hz), up to 230 feet/70 meters (up to 12-bit Deep Color)
HDMI features supported:
HDMI 2.0
HDCP 2.2 and 1.4
12-bit Deep Color (at 1080p)
LPCM 7.1, Dolby Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master Audio™ pass-through
3DTV pass-through
CEC pass-through
Lip Sync pass-through
DisplayPort™ features supported:
DP 1.1
HDCP 2.2 and 1.4
DVI input supported formats:
DVI-D, HDMI 1.4, VGA, YPbPr (Component Video), and Composite Video
HDCP 1.4 (for DVI-D and HDMI signals)
VGA input supported formats:
VGA, YPbPr (Component Video), and Composite Video
RS-232 extension or unit control
IR extension (outbound only) or unit control
Analog L/R audio breakout
Dry contact for input switching with indicator LED +5V power source
Uses Gefen’s implementation of HDBaseT™ technology with enhanced features
Advanced EDID Management for rapid integration of source and display
Field-updateable firmware via micro-USB port, using the Gefen Syner-G™ software
Locking HDMI connectors
Locking power connector
Power over HDBaseT™ (POH) provides power to a compatible Receiver unit (such as EXT-UHDA-HBTL-RX) over the link cable
IR In/Ext port works with Gefen EXT-RMT-EXTIRN IR Extender Module or electrical IR from a third-party controller
Compact, ultra-low-profile enclosure is surface-mountable and can be hidden away
Specifications
Recommended HDBaseT™ Receiver: EXT-UHDA-HBTL-RX
Maximum TMDS Clock: 340 MHz
Total Signal Bandwidth/Data Rate: 10.2 Gbps
Video Input Connectors:
(1) HDMI Type A 19-pin, locking, female
(1) DisplayPort™ 20-pin, female
(1) DVI 29-pin, female, digital and analog
(1) VGA HD-15, female
Video Output Connectors:
(1) HDMI Type A 19-pin, locking, female
(1) HDBaseT™ RJ-45, shielded
L/R Analog Audio Input port:
(1) 3.5mm mini-stereo jack
L/R Analog Audio Output port:
(1) 3-pin Phoenix with removable plug
Input Control port:
(1) 3-pin Phoenix with removable plug
RS-232 port: (1) DB-9, female
IR In/Ext port: (1) 3.5mm mini-stereo jack
IR Extender type: EXT-RMT-EXTIRN
Firmware Update port: (1) USB-Micro-B, female
Power Indicator LED: (1) Blue
HDMI Input Indicator LED: (1) Green
DisplayPort™ Input Indicator LED: (1) Green
DVI Input Indicator LED: (1) Green
VGA Input Indicator LED: (1) Green
Auto-Switch-On Indicator LED: (1) Green
Input Select Switch (hold to select Auto or Manual):
(1) tact-type
POH On/Off Switch: (1) slide-type
Power Supply Connector:
(1) 5.5mm barrel/2.1mm pin, Locking
Power Supply: (1) 12V DC, locking, 5.5mm barrel/2.1mm pin
Power Consumption:
Not powering a Receiver: 10W maximum
Powering a Receiver: 22W maximum
Operating Temperature: +32 to +122 °F (0 to +50 °C)
Operating Humidity: 5% to 90% RH, non-condensing
Storage Temperature: -4 to +185 °F (-20 to +85 °C)
Storage Humidity: 0% to 95% RH, non-condensing
MTBF: 50000 hours
Dimensions (W x H x D, not including the connectors):
Not including the mounting brackets: 12” x 1.2” x 4” (305mm x 30mm x 100mm)
Including the mounting brackets: 13.1” x 1.2” x 4” (332mm x 30mm x 100mm)
Net Weight: 1.3 lbs. (0.6 kg)
Shipping Weight: 2.7 lbs. (1.25 kg)
Fiche technique
Références spécifiques
Nous livrons dans toute l'Union Européenne
Notre offre s'adresse uniquement aux clients B to B, tous les prix sont hors taxes.
Paiements en ligne sécurisés
Envoyez votre demande via le formulaire ou par mail: avgear@avgear.shop