Libec LX7 | Trépied vidéo...
546,00 €
Le Libec LX7 offre des performances fiables pour les vidéastes professionnels à la recherche de stabilité et de fluidité. Conçu avec un trépied en...
Le trépied vidéo Libec HS-350 avec tête fluide est un système de support de qualité professionnelle conçu pour les vidéastes en quête de précision et de fiabilité. Conçu pour accueillir des configurations de caméras allant jusqu’à 8 kg, y compris des caméras portables et des caméras à grand capteur, il garantit une stabilité optimale dans diverses situations de tournage. Le HS-350 intègre le système de contrepoids continu parfait de Libec, permettant un équilibre fluide à tout angle d’inclinaison pour des mouvements de caméra précis, même avec des objectifs téléphoto. Son unité de glissement avancée, utilisant une structure métallique multicouche et une graisse siliconée haut de gamme, assure des mouvements panoramiques et d’inclinaison d’une fluidité exceptionnelle sur une large plage de températures (-40°C à +60°C). Doté d’une conception à double tête, le HS-350 est compatible avec les trépieds à bol de 75 mm et les bases plates, offrant une grande polyvalence pour divers équipements. Des trous filetés supplémentaires de 1/4” et 3/8” sur le côté de la tête fluide permettent de fixer des accessoires sans compromettre l’équilibre du système. Fabriqué en aluminium durable, le trépied à deux sections s’étend de 56 cm à 166 cm, offrant une flexibilité pour des angles de prise de vue variés.
Nous livrons dans toute l'Union Européenne
Notre offre s'adresse uniquement aux clients B to B, tous les prix sont hors taxes.
Paiements en ligne sécurisés
Envoyez votre demande via le formulaire ou par mail: avgear@avgear.shop
The HS-350 is ideal for camera configurations weighing up to 8kg, such as handheld camcorders with accessories, or large sensor cameras. The included Long Plate S is handy for front to rear camera balance setups using rigs and telephoto lenses.
Perfect Balance
Libec's unique continuous perfect counterbalance system enables the camera to perfectly balance at any tilt angle. This smooth balance system makes it a lot easier for users to concentrate on precise camera movements, even when using a telephoto lens at its maximum zoomed position.
Newly Designed Fluid Head
From scratch, the fluid head was designed to dramatically reduce play inside its superior pan and tilt drag units, dramatically increasing its longevity. From start to finish, this new fluid head provides ultra-smooth movements and is equipped with many features that enhance a user's experience.
Counterbalance Meter
Equipped with a counterbalance meter with the measurement range of 0 to 100. This allows users to glance at the head's minimum/maximum inner spring strength, making camera balances on site a piece of cake.
Advanced Drag Unit
The layered metal unit in the drag system ensures operability, durability and reliability. Thanks to the finest silicon grease applied, the advanced drag unit offers smoother starts and ultimately improved backlash control. In addition, the grease provides ordinary pan and tilt movements at a wide temperature range from -40˚C/-40˚F up to +60˚C/+140˚F. The variable 4 step drag pan tilt system features a zero "free" mode option with no friction. Unlike other brand heads, there is no need to store it in its zero "free" mode.
User Friendly Accessory Port
Equipped on the fluid head's side, there are 1/4 and 3/8 inch screw holes allowing users to attach an accessory arm to hold monitors, lights and other accessories. Since the holes are located on the base, the payload capacity, center of gravity and front-rear balance of the head are not affected.
DualHead
The Dual-head base specification allows for a quick set-up with both 75mm bowl and flat base tripods. The Dual-head base is also compatible with sliders, skater dollies, and photo tripods.
User Friendly Accessory Attachments
On the side of the fluid head, there are 1/4 and 3/8 inch screw holes to attach an accessory arm with a monitor or a light. Since the holes are located on the base, the payload capacity, center of gravity and front-rear balance are not affected.
Double-sided Serrations
Serrations are equipped on both sides of the head to accommodate an additional pan handle or other accessories.
Snap ON/OFF Sliding Plate
The slide plate can be attached and released with just one-touch. Quick and easy setups in the field are easily achieved.
Highly Compatible Slide Plate
Slide plate is compatible with Libec's TH-M, TH-X, TH-Z, and NX Series. This industry standard slide plate is also compatible with other brand tripod systems and accessories, allowing users to quickly swap between a wide range of camera supports.
LED Bubble Level
The bubble level is equipped with an LED light allowing users to level a tripod head in the dark. In addition, the counterbalance meter is also illuminated.
Safety Design
With safety in mind, the tripod legs are carefully designed to prevent users from pinching their fingers when intentionally or unintentionally collapsing their tripod.
1x Fluid Head: H35
1x Tripod: RT30B
1x Spreader: SP-2B
1x Long Plate S
1x Carrying bag: RC-30
Specifications
Counterbalance range 3 to 7.5kg / 6.6 to 16.5lb (C.G.100mm)
Payload 8kg / 17.6lb
Counterbalance Perfect Balance
Continuous Counterbalance with Illuminated Meter
Pan drag mode Free plus 3 steps
Tilt drag mode Free plus 3 steps
Drag system Multilayered Metal Structure
Tilt angle +90° / -70°
Temperature range -40°C to +60°C / -40°F to +140°F
Bubble level Illuminated
Camera plate Sliding plate compatible with Manfrotto and Sachtler heads
Sliding range +/-30mm / 1.2"
Long sliding plate Included
Plate attachment 1/4" screw with video pin
Accessory attachments 1/4" and 3/8" screw holes
Spare screw 1/4" and 3/8" screws
Weight 6.3kg / 13.9lb
Height 56 to 166cm / 22 to 65.4"
Head attachment 75mm bowl
Pipe material Aluminium
Section 2-Stage
Fiche technique
Références spécifiques