Libec HS-450M Trépied vidéo

Name: Libec HS-450M Trépied vidéo
Brand: Libec
SKU: HS-450M
Price: 1599.00 EUR
Availability: InStock

MPN: HS-450M

Prix : 1 599,00 €

Ventes à l'échelle de l'UE, facturation pour livraisons intracommunautaires exonérée de TVA.

Disponible chez le fournisseur (délai de livraison à confirmer)

Libec HS-450M est un système trépied de niveau broadcast pour des configurations caméra jusqu’à 12 kg, associant la tête fluide H45 à des jambes aluminium à forte rigidité et à un diffuseur intermédiaire qui conserve la géométrie sur sols irréguliers en studio comme en extérieur. La base double accepte le montage en bol 75 mm ou en base plate, afin de passer d’un trépied classique à une plateforme plate, un slider ou une dolly skater sans changer de tête. Le diffuseur se règle ou se retire, et les jambes offrent des pointes métal intégrées ainsi que de larges patins caoutchouc pour un appui sûr sur surfaces mixtes.

L’équilibrage repose sur le contrepoids continu Perfect Balance, couvrant 4,5–10,5 kg à 100 mm de C.G., avec un indicateur 0–100 rétroéclairé pour retrouver rapidement un pack caméra connu. Le freinage pan/tilt utilise l’architecture Variable Switch Torque avec mode free + 3 niveaux de drag, basée sur une structure métal multicouche et une graisse silicone assurant un comportement stable de -40°C à +60°C. La plage de bascule +90°/-70° couvre les angles bas et hauts, et le niveau à bulle éclairé accélère la mise à niveau en faible lumière.

La plaque coulissante snap on/off accélère les changements de caméra en multicam et en location, tout en restant compatible avec des plaques de type Sachtler/Manfrotto. La Long Plate S fournie et la course ±30 mm sécurisent les rigs avant-lourds (matte box, zoom cinéma, follow focus, prompteur, batteries V-mount). La fixation se fait via une vis 1/4" avec pion vidéo, avec des vis 1/4" et 3/8" de rechange. Plusieurs pas de vis 1/4" et 3/8" sur la tête et le trépied reçoivent bras moniteur, récepteur HF vidéo, boîtier timecode ou intercom.

Applications typiques : ENG/EFP, interviews, documentaire et corporate, captation sportive ou conférences, ainsi que plateaux de streaming où la fluidité et la répétabilité priment. La valise de transport facilite les déplacements entre lieux de tournage.

Expédition vers l'UE

Livraison dans toute l’UE pour 20 €, gratuite dès 1 000 €.

Boutique B2B

Boutique B2B réservée aux professionnels, prix HT.

Achats en toute sécurité

Distribution et garantie officielles de l'UE.

Paiement sécurisé

Paiements en ligne sécurisés via Stripe.

Devis individuel

Demande de devis via formulaire ou e-mail: avgear@avgear.shop

The HS-450M is ideal for camera configurations weighing up to 12kg, such as large sensor cameras with various accessories and small-sized shoulder cameras. Unlike other models in the HS series, this model is equipped with the robust RT40RB tripods legs designed with a higher rigidity and stability rating, which makes it better suited for heavier payloads. The Long Plate S, included in the kit, is handy for front to rear camera balance setups within its counterbalance range.

Perfect Balance
Libec's unique continuous perfect counterbalance system enables the camera to perfectly balance at any tilt angle. This smooth balance system makes it a lot easier for users to concentrate on precise camera movements, even when using a telephoto lens at its maximum zoomed position.

Newly Designed Fluid Head
From scratch, the fluid head was designed to dramatically reduce play inside its superior pan and tilt drag units, dramatically increasing its longevity. From start to finish, this new fluid head provides ultra-smooth movements and is equipped with many features that enhance a user's experience.

Counterbalance Meter
Equipped with a counterbalance meter with the measurement range of 0 to 100. This allows users to glance at the head's minimum/maximum inner spring strength, making camera balances on site a piece of cake.

Advanced Drag Unit
The layered metal unit in the drag system ensures operability, durability and reliability. Thanks to the finest silicon grease applied, the advanced drag unit offers smoother starts and ultimately improved backlash control. In addition, the grease provides ordinary pan and tilt movements at a wide temperature range from -40˚C/-40˚F up to +60˚C/+140˚F. The variable 4 step drag pan tilt system features a zero "free" mode option with no friction. Unlike other brand heads, there is no need to store it in its zero "free" mode.

User Friendly Accessory Port
Equipped on the fluid head's side, there are 1/4 and 3/8 inch screw holes allowing users to attach an accessory arm to hold monitors, lights and other accessories. Since the holes are located on the base, the payload capacity, center of gravity and front-rear balance of the head are not affected.

DualHead
The Dual-head base specification allows for a quick set-up with both 75mm bowl and flat base tripods. The Dual-head base is also compatible with sliders, skater dollies, and photo tripods.

User Friendly Accessory Attachments
On the side of the fluid head, there are 1/4 and 3/8 inch screw holes to attach an accessory arm with a monitor or a light. Since the holes are located on the base, the payload capacity, center of gravity and front-rear balance are not affected.

Double-sided Serrations
Serrations are equipped on both sides of the head to accommodate an additional pan handle or other accessories.

Snap ON/OFF Sliding Plate
The slide plate can be attached and released with just one-touch. Quick and easy setups in the field are easily achieved.

Highly Compatible Slide Plate
Slide plate is compatible with Libec's TH-M, TH-X, TH-Z, and NX Series. This industry standard slide plate is also compatible with other brand tripod systems and accessories, allowing users to quickly swap between a wide range of camera supports.

LED Bubble Level
The bubble level is equipped with an LED light allowing users to level a tripod head in the dark. In addition, the counterbalance meter is also illuminated.

Safety Design
With safety in mind, the tripod legs are carefully designed to prevent users from pinching their fingers when intentionally or unintentionally collapsing their tripod.

1x Fluid Head: H45
1x Tripod: RT40RB
1x Spreader: BR-6B
1x Large rubber feet FP-2B
1x Long Plate S
1x Carrying bag: RC-50

Specifications
Counterbalance range 4.5 to 10.5kg / 9.9 to 23.1lb (C.G.100mm)
Payload 12kg / 26.5lb
Counterbalance Perfect Balance
Continuous Counterbalance with Illuminated Meter
Pan drag mode Free plus 3 steps
Tilt drag mode Free plus 3 steps
Drag system Multilayered Metal Structure
Tilt angle +90° / -70°
Temperature range -40°C to +60°C / -40°F to +140°F
Bubble level Illuminated
Camera plate Sliding plate compatible with Manfrotto and Sachtler heads
Sliding range +/-30mm / 1.2"
Long sliding plate Included
Plate attachment 1/4" screw with video pin
Accessory attachments 1/4" and 3/8" screw holes
Spare screw 1/4" and 3/8" screws
Weight 6.6kg / 14.6lb
Height 83 to 171cm / 32.6 to 65"
Head attachment 75mm bowl
Pipe material Aluminium
Section 2-Stage