Epiphan AV.io HD+ | Carte d'acquisition vidéo HDMI, USB Grabber
478,00 €
Découvrez la capture vidéo avancée avec l’Epiphan AV.io HD+, un grabber HDMI USB 3.0 conçu pour un streaming et un enregistrement en 1080p60 sans...
Magewell Eco Capture Dual HDMI M.2 (11514) est une carte d’acquisition bi-canal ultra-compacte capable d’ingérer deux flux HDMI 1.4a jusqu’à 2048 × 2160 px (80 ips en 1920 × 1080). Son module M.2 2280 Type-M de 22 × 80 mm se glisse directement dans un port PCIe Gen2 ×4, libérant des emplacements essentiels dans les stations de montage, serveurs de diffusion et régies mobiles.
Grâce à deux récepteurs HDMI pleine bande et à l’audio huit canaux IEC 60958, chaque entrée devient un périphérique DirectShow ou V4L2 distinct, routable vers NLE, vMix, OBS, Wirecast ou pipelines GPU. L’égaliseur matériel 165 MHz assure un signal propre sur 30 m, tandis que l’EDID adaptatif et l’extraction complète des InfoFrames sécurisent les négociations avec caméras, mélangeurs et DSLR.
Le processeur de 180 Mpixels/s réalise désentrelacement, conversion 4:4:4, mise à l’échelle et adaptation de cadenceavec un estampillage matériel < 100 ns. Des flux dupliqués illimités par canal autorisent enregistrement, monitoring et streaming simultanés sans charge CPU. Le débit SG-DMA d’environ 700 Mo/s par canal, associé à DirectGMA/GPUDirect, offre des transferts sans copie pour les workflows AR en temps réel. Extraction 8/10/12 bits, formats 3D, EDID personnalisé et time-code DSLR sont aussi pris en charge.
Ne consommant que 4,17 W sous 3,3 V, la carte reste froide en service 24/7. Plage 0 °C–40 °C, 5–90 % HR ; parfaite pour cars-régie et fly-packs. Le DIP 16 positions et les LED d’état simplifient les configurations multi-cartes ; firmware évolutif et SDK Windows/Linux pérennisent l’intégration. Magewell Eco Capture Dual HDMI M.2 garantit une acquisition fiable, une colorimétrie intacte et une efficacité exemplaire par watt.
Nous livrons dans toute l'Union Européenne pour 20 €, livraison gratuite pour les commandes supérieures à 1 000 €.
Notre offre s'adresse uniquement aux clients B to B, tous les prix sont hors taxes.
Paiements en ligne sécurisés via Stripe.
Envoyez votre demande via le formulaire ou par mail: avgear@avgear.shop
The Eco Capture Dual HDMI M.2 is a two-channel HDMI capture card with connection for a M.2 slot. This Eco card supports video capture for HDMI signals up to 2048 x 2160 per channel input with embedded audio, and high-frame rate capture up to 144fps. These cards (22x80mm) are designed for small and portable systems that do not have space for full-size PCIe slots.
The Magewell Eco Capture M.2 cards offer high-performance and powerful video capture solutions with low power consumption. The Magewell SDK enables developers to customize the Magewell APIs for lower-latency capture and synchronize channels across multi-channel or even multiple capture cards.
- Two-channel 2K capture card
- HDMI (2048 x 2160) x 2 + embedded audio x 2
How to connect Magewell Eco Capture cards?
The Magewell Eco Capture Dual HDMI M.2 supports two HDMI inputs which can be connected via the included FPC to HDMI type A2 adapters. Open the metal slot of the adapter, insert the ribbon cable, and lock it. Then insert the ribbon cable into the Eco Capture Dual HDMI M.2 card (with the metal part of the cable facing upwards).
Supported OS
Windows
Windows 7/8/8.1/10/11/Server 2008/Server 2008 R2/Server 2012/Server 2016 (x86 & x64) and above
Linux (support x86, x64 & ARM architecture)
Ubuntu 12.04/14.04/16.04/17.04/17.10/18.04 (x86 & x64) and above CentOS 6.5/7 (x86 & x64) and above
Fedora 25/26/27 (x86 & x64) and above
Red hat 6.5 (x86 & x64) and above
Other Linux OS with kernel version 2.6.35 and above
Recommended OS (tested)
Windows
Windows 7 Ultimate/8.1 Enterprise/10 Enterprise/Server 2008 R2 DataCenter/Server 2012 R2 DataCenter/Server 2016 R2 DataCenter (x86 & x64)
Linux
Ubuntu 12.04/14.04/16.04 (x86 & x64)
Ubuntu 17.04/17.10/18.04 (x64)
CentOS 6.5/7.2 (x86 & x64)
Fedora 25/26 (x64)
Red hat 6.5 (x86 & x64)
Supported APIs
Windows
DirectShow
DirectKS
Wave API/DirectSound/WASAPI
Linux
V4L2
ALSA
Supported Software
VLC
VirtualDub
OBS
XSplit
vMix
VidBlaster
Wirecast
Microsoft Media Encoder
Adobe Flash Media Encoder
Any other DirectShow/V4L2 encoding/streaming software
Input Interfaces
2x JST SHD 20-Pin socket (Part number: 11510)
DVI 1.0
HDMI 1.4a
2x FPC 20-Pin socket (Part number: 11514)
DVI 1.0
HDMI 1.4a
Host Interface
M.2 2280 Type M (PCIe Gen2 x4)
Input Features
Support for input video resolutions up to 2048x2160 pixels
HDMI Specific Features
165MHz HDMI receiver
Adaptive HDMI equalizer, the HDMI transmission distance can be up to 30 meters Support for customized EDID
Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames Full colorimetry support
Support for 8/10/12-bit color depths
Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
Support for up to 8-channel IEC60958/IEC61937 audio streams via SDK
Support for extraction of audio formation information & channel status data
Support for extraction of video timing information
Support for extraction of 3D format information
Support for extraction of Sony/Canon DSLR time code
Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode
Video Capture Formats
Support for capture image resolutions up to 2048x2160 pixels
Support for capture frame rates up to 144fps (Actual capture frame rate can be limited by PCIe bandwidth. For the resolution of 1280x1024 and higher, the actual frame rate may be limited by the onboard video processing hardware pixel clock. For example, the maximum frame rate of 1920x1080 resolution can be up to 80fps.)
Support for 4:2:0 8-bit capture formats: NV12, I420, YV12
Support for 4:2:2 8-bit capture formats: YUY2, YUYV, UYVY
Support for 4:4:4 8-bit capture formats: V308, IYU2, V408, BGR24, BGR32
More capture formats are supported via SDK
Video Processing Features
Video processing pipelines with ~180Mpixels/s processing bandwidth
8-bit 4:4:4 video processing
Video scaling
Video de-interlacing
Weave
Blend top & bottom field
Video color format conversion
Auto or manual selection of input color format & quantization range
Auto or manual selection of capture color format, quantization range & saturation range Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
Support for Limited or Full quantization range
Support for Limited, Full & ‘Extended gamut’ saturation range
Video frame rate conversion
Multiple Cards per System
Support for multiple cards plugged to one system
On-board dip switch to set card number with 16 positions
System hardware device tree will display “01: Eco Capture Dual HDMI M.2” when dip switch is set to 0001, and so on The video and audio device names displayed in your software will include the card number (set by the dip switch)
Multiple Replicated Capture Streams
Unlimited capture streams for any one input channel, but the capture streams should be in the same capture format.
Timestamp & A/V Synchronization
Hardware based 100ns high resolution clock
Audio frames (192 audio samples) & video frames are stamped with hardware clock
Hardware clock can be synchronized across cards (via SDK)
Video Capture SG-DMA
~700MB/s per channel DMA bandwidth in PCIe 2.x system
~400MB/s per channel DMA bandwidth in PCIe 1.x system
Support for auto detection of Intel tiled GPU surface
Support for DirectGMA for AMD video adapter chipsets
Support for GPUDirect for Nvidia video adapter chipsets
SDK
Magewell Capture SDK for DirectShow (Windows) or V4L2 (Linux) for easy integration
Magewell Capture SDK for DirectKS (Windows) or ioctl (Linux) for maximum flexibility & performance
Windows Driver Tweaks
All options can be controlled by three levels of registry key: global level, product level and device level
Video, Audio, Crossbar filter names can be customized via registry keys
Firmware Upgrade
Multiple cards in one system can be upgraded simultaneously
Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not needed)
Safe upgrade. If power off or system break down occur when the firmware is being upgraded, it will automatically restore to the initial version. This function is only available for firmware version 1.21 and above.
LED Indicator
Status LEDs indicate the working state of each channel:
Pulsing slowly: idle
On: input signal locked
Off: input signal unlocked
Double blinks: memory failed or FPGA configuration failed
Form Factor
M.2 2280 standard size
Accessories
2 X SHD to HDMI type A cables (Part number: 11510)
2 X FPC ribbon cables (Part number: 11514)
2 X FPC to HDMI type A adapters (Part number: 11514)
Power Consumption
Max current at 3.3V: ~ 1.25 A
Max power consumption: ~ 4.17 W
Working Environment
Operating temperature: 0 to 40 deg C
Storage temperature: –20 to 70 deg C
Relative Humidity: 5% to 90% non-condensing
Fiche technique
Références spécifiques