Libec HS-150 | Video Tripod with Fluid Head

No tax

The HS-150 is the ideal model for mirrorless cameras, DSLRs and small handheld camcorders such as the Sony PXW-Z90. This model has the ability to perfectly balance even the lightest settings of a mirrorless camera with kit lenses. For lightweight cameras such as Sony α7, Panasonic GH5 and Canon EOS R5, this model offers excellent camera movements with no compromise. The HS-150 can also support these cameras with commonly used camera rigs.

Perfect Balance
Libec's unique continuous perfect counterbalance system enables the camera to perfectly balance at any tilt angle. This smooth balance system makes it a lot easier for users to concentrate on precise camera movements, even when using a telephoto lens at its maximum zoomed position.

Last items in stock

Newly Designed Fluid Head
From scratch, the fluid head was designed to dramatically reduce play inside its superior pan and tilt drag units, dramatically increasing its longevity. From start to finish, this new fluid head provides ultra-smooth movements and is equipped with many features that enhance a user's experience.

Counterbalance Meter
Equipped with a counterbalance meter with the measurement range of 0 to 100. This allows users to glance at the head's minimum/maximum inner spring strength, making camera balances on site a piece of cake.

Advanced Drag Unit
The layered metal unit in the drag system ensures operability, durability and reliability. Thanks to the finest silicon grease applied, the advanced drag unit offers smoother starts and ultimately improved backlash control. In addition, the grease provides ordinary pan and tilt movements at a wide temperature range from -40˚C/-40˚F up to +60˚C/+140˚F. The variable 4 step drag pan tilt system features a zero "free" mode option with no friction. Unlike other brand heads, there is no need to store it in its zero "free" mode.

User Friendly Accessory Port
Equipped on the fluid head's side, there are 1/4 and 3/8 inch screw holes allowing users to attach an accessory arm to hold monitors, lights and other accessories. Since the holes are located on the base, the payload capacity, center of gravity and front-rear balance of the head are not affected.

The Dual-head base specification allows for a quick set-up with both 75mm bowl and flat base tripods. The Dual-head base is also compatible with sliders, skater dollies, and photo tripods.

User Friendly Accessory Attachments
On the side of the fluid head, there are 1/4 and 3/8 inch screw holes to attach an accessory arm with a monitor or a light. Since the holes are located on the base, the payload capacity, center of gravity and front-rear balance are not affected.

Double-sided Serrations
Serrations are equipped on both sides of the head to accommodate an additional pan handle or other accessories.

Snap ON/OFF Sliding Plate
The slide plate can be attached and released with just one-touch. Quick and easy setups in the field are easily achieved.

Highly Compatible Slide Plate
Slide plate is compatible with Libec's TH-M, TH-X, TH-Z, and NX Series. This industry standard slide plate is also compatible with other brand tripod systems and accessories, allowing users to quickly swap between a wide range of camera supports.

LED Bubble Level
The bubble level is equipped with an LED light allowing users to level a tripod head in the dark. In addition, the counterbalance meter is also illuminated.

Safety Design
With safety in mind, the tripod legs are carefully designed to prevent users from pinching their fingers when intentionally or unintentionally collapsing their tripod.

1x Fluid Head: H15
1x Tripod: RT30B
1x Spreader: SP-2B
1x Carrying bag: RC-30

Counterbalance range 0.8 to 2kg / 1.7 to 4.4lb (C.G.55mm)
Payload 3kg / 6.6lb
Counterbalance Perfect Balance
Continuous Counterbalance with Illuminated Meter
Pan drag mode Free plus 3 steps
Tilt drag mode Free plus 3 steps
Drag system Multilayered Metal Structure
Tilt angle +90° / -70°
Temperature range -40°C to +60°C / -40°F to +140°F
Bubble level Illuminated
Camera plate Sliding plate compatible with Manfrotto and Sachtler heads
Sliding range +/-30mm / 1.2"
Long sliding plate Optional
Plate attachment 1/4" screw with video pin
Accessory attachments 1/4" and 3/8" screw holes
Spare screw 1/4" and 3/8" screws
Weight 6.2kg / 13.7lb
Height 56 to 166cm / 22 to 65.4"
Head attachment 75mm bowl
Pipe material Aluminium
Section 2-Stage

1 Item

Data sheet

Tripod type
Payload (kg)
Maximum Height (cm)
Ball diameter
Spreader Type

Specific References


Contact us

Related Products ( 16 other products in the same category )

UE Shipping

We ship all over the European Union

B2B Shop

Our offer is aimed only to B to B Customers, all prices are exclusive of tax.

Secure checkout

Secure online payments

Individual quotation

Send your enquiry via the form or email