The Magewell Pro Convert Pro Convert for NDI® to SDI converts a live NDI® stream with embedded audio into SDI. Decode 2K 60fps NDI streams into SDI output up to 1920x1080 60fps at very low latency. Full NDI® and NDI®|HX are supported for decoding.

Pro Convert decoders support both dedicated video-over-IP and universal streaming protocols including NDI®, SRT (Secure Reliable Transport), RTMP, RTSP, RTP, UDP, HTTP and HLS, enabling high-quality conversion of full NDI, NDI|HX, H.264 (AVC) or H.265 (HEVC) streams into high-quality HDMI or SDI outputs.

Compatible with a wide variety of hardware and software encoders, Pro Convert decoders transform input streams up to 4096x2160 at 60fps for output to baseband monitors, projectors, hardware switchers and more.

They are perfect for multi-site video distribution, video walls, image magnification (IMAG), digital signage, remote production, and video surveillance. 

- Converts a live NDI® stream into SDI 
- Connects baseband presentation or distribution equipment into IP-based media networks 
- Supports NDI technology including full-bandwidth NDI and high-efficiency NDI|HX mode 
- Supports streaming protocols including SRT, RTSP, RTMP, UDP, RTP, HLS and HTTP

Output Features
Max output: 1920x1080p60. Supported output formats are:
1920x1080p 23.98/24/25/29.97/30/50/59.94/60 1920x1080i 50/59.94/60
1280x720p 23.98/24/25/29.97/30/50/59.94/60 720x576i50
720x480i59.94
Support YUV BT.601, YUV BT.709 signals
Support 48KHz 8-channel audio output
SD/HD/3G-SDI BNC output
Support SD (ST 259)/HD (ST 292)/3Ga (ST 425)/3Gb (ST 425)/3Gb-DL (ST 425)/3Gb-DS (ST 425) SDI standards
Output 3G-SDI signal and transmitted distance greater than 100m (328ft)

Decoding Features
Decoding up to 2Kp60 streams of Full NDI, NDI®|HX, NDI®|HX2, NDI®|HX3, RTSP, HTTP, HLS, RTMP Pull/Push, and MPEG-TS over UDP/SRT/RTP protocols
H.264/H.265 video decoders
AAC/MP3 audio decoders
Support NDI 5.x

Configuration Management
Register with Magewell Cloud
Remote control via WebUI and Magewell Cloud
Provide comprehensive information regarding the device and decoded signals in real-time
Allow to configure how a signal is processed and decoded, including:
OSD setting, deinterlacing, resolution, frame rate, AR conversion
audio gain, sample rate and audio channel mapping
network connection
Update firmware
Support USB RNDIS/ECM
Support IE/Edge/Firefox/Chrome/Safari/Opera web browsers
Provide HTTP APIs

On-board Control Buttons
MENU: press to display the menu, or cycle through the options
SELECT: press to display the menu, enter current option, or confirm the selection
16 Position Rotary DIP Switch: set board-index from 0 to F

Network Interfaces
10/100/1000Mbps Ethernet
IEEE 802.3af PoE

USB Interfaces
USB2.0 Type B
5V/2.1A power supply
USB RNDIS/ECM
USB3.0 Type A
Connecting peripherals (keyboard and/or mouse) to set up device

LED Indicators
Power LED status indicator
On: power connected
Off: power unconnected
Decode LED status indicator
On: decoding
Blinks: decoding error
Off: source unselected

Form Factor
100.9mm (L) x 60.2mm (W) x 23.3mm (H)

Accessories
USB 2.0 A to B cable
5V/2.1A power adaptor
L-bracket

Screw Mounting Hole
1⁄4–20 threaded hole

Power Consumption
5V max current: ~1.05A
Max power consumption: ~5.5W

Working Environment
Operating temperature: 0 to 40 deg C
Storage temperature: –20 to 70 deg C
Relative humidity: 5% to 90% non-condensing