Newly Designed Fluid Head
From scratch, the fluid head was designed to dramatically reduce play inside its superior pan and tilt drag units, dramatically increasing its longevity. From start to finish, this new fluid head provides ultra-smooth movements and is equipped with many features that enhance a user's experience.

Counterbalance Meter
Equipped with a counterbalance meter with the measurement range of 0 to 100. This allows users to glance at the head's minimum/maximum inner spring strength, making camera balances on site a piece of cake.

Advanced Drag Unit
The layered metal unit in the drag system ensures operability, durability and reliability. Thanks to the finest silicon grease applied, the advanced drag unit offers smoother starts and ultimately improved backlash control. In addition, the grease provides ordinary pan and tilt movements at a wide temperature range from -40˚C/-40˚F up to +60˚C/+140˚F. The variable 4 step drag pan tilt system features a zero "free" mode option with no friction. Unlike other brand heads, there is no need to store it in its zero "free" mode.

User Friendly Accessory Port
Equipped on the fluid head's side, there are 1/4 and 3/8 inch screw holes allowing users to attach an accessory arm to hold monitors, lights and other accessories. Since the holes are located on the base, the payload capacity, center of gravity and front-rear balance of the head are not affected.

DualHead
The Dual-head base specification allows for a quick set-up with both 75mm bowl and flat base tripods. The Dual-head base is also compatible with sliders, skater dollies, and photo tripods.

Double-sided Serrations
Serrations are equipped on both sides of the head to accommodate an additional pan handle or other accessories.

Snap ON/OFF Sliding Plate
The slide plate can be attached and released with just one-touch. Quick and easy setups in the field are easily achieved.

Highly Compatible Slide Plate
Slide plate is compatible with Libec's TH-M, TH-X, TH-Z, and NX Series. This industry standard slide plate is also compatible with other brand tripod systems and accessories, allowing users to quickly swap between a wide range of camera supports.

LED Bubble Level
The bubble level is equipped with an LED light allowing users to level a tripod head in the dark. In addition, the counterbalance meter is also illuminated.

Safety Design
With safety in mind, the tripod legs are carefully designed to prevent users from pinching their fingers when intentionally or unintentionally collapsing their tripod.

Fluid Head: H25
Tripod: RT30B
Spreader: BR-2B
Large rubber feet FP-2B
Carrying bag: RC-30

Specifications
Counterbalance range 1.7 to 4.5kg / 3.7 to 9.9lb (C.G.100mm)
Payload 5kg / 11lb
Counterbalance Perfect Balance
Continuous Counterbalance with Illuminated Meter
Pan drag mode Free plus 3 steps
Tilt drag mode Free plus 3 steps
Drag system Multilayered Metal Structure
Tilt angle +90° / -70°
Temperature range -40°C to +60°C / -40°F to +140°F
Bubble level Illuminated
Camera plate Sliding plate compatible with Manfrotto and Sachtler heads
Sliding range +/-30mm / 1.2"
Long sliding plate Optional
Plate attachment 1/4" screw with video pin
Accessory attachments 1/4" and 3/8" screw holes
Spare screw 1/4" and 3/8" screws
Weight 6.0kg / 13.2lb
Height 81 to 166cm / 31.9 to 65.4"
Head attachment 75mm bowl
Pipe material Aluminium
Section 2-Stage