The Magewell Pro Convert NDI® to AIO converts a live NDI® stream into HDMI and SDI. Decode NDI streams up to 2K 60fps into into SD/HD/3G-SDI or 1920x1080 60fps HDMI output signal at extremely low latency.

Pro Convert decoders support both dedicated video-over-IP and universal streaming protocols including NDI®, SRT (Secure Reliable Transport), RTMP, RTSP, RTP, UDP, HTTP and HLS, enabling high-quality conversion of full NDI, NDI|HX, H.264 (AVC) or H.265 (HEVC) streams into high-quality HDMI or SDI outputs.

Compatible with a wide variety of hardware and software encoders, Pro Convert decoders transform input streams up to 4096x2160 at 60fps for output to baseband monitors, projectors, hardware switchers and more.

They are perfect for multi-site video distribution, video walls, image magnification (IMAG), digital signage, remote production and video surveillance.

- Converts a live NDI® stream into HDMI and SDI 
- Connects baseband presentation or distribution equipment into IP-based media networks 
- Supports NDI technology including Full NDI and NDI|HX mode 
- Supports streaming protocols including SRT, RTSP, RTMP, UDP, RTP, HLS and HTTP

HDMI Output
Max output: 1920x1080p60
Delivery video within 2K at the preferred video format according to the EDID of the connected monitor
Support YUV BT.601, YUV BT.709 signal
Support 48KHz 8-channel audio output
HDMI interface: HDMI 1.4

SDI Output
Max output: 1920x1080p60. Supported output formats are:
1920x1080p 23.98/24/25/29.97/30/50/59.94/60
1920x1080i 50/59.94/60
1280x720p 23.98/24/25/29.97/30/50/59.94/60
720x576i50
720x480i59.94
Support YUV BT.601/709 signal
Support 48KHz 8-channel audio output
SD/HD/3G-SDI BNC output
Support SD (ST 259)/HD (ST 292)/3Ga (ST 425)/3Gb (ST 425)/3Gb-DL (ST 425)/3Gb-DS (ST 425) SDI standards
Output 3G-SDI signal and transmitted distance at 130m (427ft)

Decoding Features
Decoding up to 2Kp60 streams of Full NDI, NDI®|HX, NDI®|HX2, NDI®|HX3, RTSP, HTTP, HLS, RTMP Pull/Push, and MPEG-TS over UDP/SRT/RTP protocols
Simultaneously decode and output HDMI and SDI signals
H.264/H.265 video decoders
AAC/MP3 audio decoders
Support NDI 5.x

Configuration Management
Register with Magewell Cloud
Remote control via WebUI and Magewell Cloud
Provide comprehensive information regarding the device and decoded signals in real-time
Allow to configure how a signal is decoded and output, including OSD settings, deinterlacing, resolutions, audio gain, sample rate, and channel mapping, as well as the network connection
Update firmware
Support USB RNDIS/ECM
Support IE/Edge/Firefox/Chrome/Safari/Opera web browsers
Provide HTTP APIs

On-board Control Buttons
MENU: press to display the menu, or cycle through the options
SELECT: press to display the menu, enter current option, or confirm the selection
16 Position Rotary DIP Switch: set board-index from 0 to F

Network Interfaces
10/100/1000Mbps Ethernet
IEEE 802.3af PoE

USB Interface
USB2.0 Type B
5V/2.1A power supply
USB RNDIS/ECM

LED Indicators
Power LED status indicator
On: power connected
Off: power unconnected Decode LED status indicator
On: decoding
Blinks: decoding error
Off: source unselected

Form Factor
100.9mm (L) x 60.2mm (W) x 23.3mm (H)

Accessories
USB 2.0 A to B cable
5V/2.1A power adaptor
L-bracket

Screw Mounting Hole
1⁄4–20 threaded hole

Power Consumption
5V max current: ~1.05A
Max power consumption: ~5.5W

Working Environment
Operating temperature: 0 to 40 deg C
Storage temperature: –20 to 70 deg C
Relative humidity: 5% to 90% non-condensing