Accsoon CineView SE SET | Wireless Video Transmission 350m, HDMI, SDI, TX/RX System
€575.00
The Accsoon CineView SE SET offers reliable wireless video transmission with a range of up to 350 meters, making it ideal for film and video...
Teradek Bolt 6 LT 750 TX/RX Set delivers uncompromised wireless video transmission for multi-camera production, adding 6 GHz spectrum to chaotic locations. Dual 3G-SDI / HDMI pathways accept UHD 4K 30 p via HDMI or 1080 p 60 through SDI and forward an uncompressed 10-bit 4:2:2 HDR image to the receiver with < 0.001 s latency. A robust line-of-sight reach of 228 m keeps Steadicams and DIT carts agile with 24-bit/48 kHz audio and full timecode integrity.
AES-256 encryption with RSA-1024 pairing shields footage, and agile RF modules switch between 12 new U-NII-5 channels or the familiar 5 GHz Bolt 4K ecosystem without hand-offs. A bright OLED plus the Bolt Manager mobile app provide spectrum scans, LUT toggles, and the inbuilt SDI Eye Pattern cable probe.
Selectable Long-Range and Broadcast modes adjust modulation for challenging venues, while one transmitter feeds up to six receivers simultaneously at 23 dBm. Two RP-SMA V-stub antennas on the TX and five on the RX boost diversity yet remain damage-proof on handheld rigs.
CNC-milled aluminium shells measure 103 × 60 × 33 mm (206 g) for the transmitter and 122 × 94 × 27 mm (292 g) for the receiver. Each unit draws 9 W / 11 W from a 6–28 V DC 2-pin LEMO and offers ¼-20 & ⅜-16 mounts. 40 MHz/20 MHz channels, cooling that operates from 0–40 °C, Bluetooth LE pairing, SDR/HDR auto-sensing and Rec. 2020 / DCI-P3 colour pass-through make Teradek Bolt 6 LT 750 the reference link for studio, OB-truck and live-stream workflows Now.
We ship all over the European Union for €20, free shipping on orders over €1,000.
Our offer is aimed only to B to B Customers, all prices are exclusive of tax.
Secure online payments via Stripe.
Send your enquiry via the form or email avgear@avgear.shop
Technical Specs
Bolt 6 LT 750 RX
Video Outputs: 3G-SDI SMPTE 424M standard / 75 Ω (BNC x 1) 1 x HDMI 1.4b Type-A receptacle
Sdi Ancillary Data Support: Supports reading metadata, timecode, and start/stop flags from most camera manufacturers.
Color Sampling: SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB/YCbCr 4:4:4 8-bit, 4:2:2 10-bit
Output Video Scaling: No manual settings, but all signals above 4K30 for HDMI and 1080p60 for SDI are scaled down to 1080p for corresponding output
Supported Resolutions: 4Kp23.98/24/25/29.97/30 (HDMI only) 1080p23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60
Video Compression: Visually Lossless
Test Pattern Generator Support: Yes
Spectrum Analyzer: Yes
Color Correction: 17x17x17 3D LUT (supports 10-bit color)
Audio Compression: 48kHz 24-bit PCM
Dimensions: 122mm x 94mm x 27mm
Weight: 292g (10.3oz)
Construction: Milled Aluminum(Chassis) and regulation-compliant PCB
Mountability: Multiple mounting options with 1/4"x20 and 3/8"x16 holes
Configuration Interfaces: OSD with Menu, Joystick Navigation
Switches: On/Off Switch
Mobile App: Bolt App
Desktop App: Bolt Manager application for OSX & Windows
Usb Interface Functionality: Upgrade via Micro-USB
Bluetooth: 2.4 GHz
Antennas: 5 External 2 dBi antennas (included)
Wireless: Non-DFS Frequencies: 5.190 ~ 5.230 GHz, 5.755 ~ 5.795 GHz, 5.945 ~ 6.425GHz DFS Frequencies: 5.270 ~ 5.670 GHz
Rf Channel Selection: Auto, Manual
Encryption: AES-256, RSA-1024 key exchange
Rf Power: 21 dbm EIRP
Range: Up to 750 ft, line of sight
Unicast Multicast: Can connect one Transmitter to up to 6 Receivers
Noise Rejection: Can coexist with WiFi and 5GHz cordless phones Can operate up to 6 sets in same location
Interoperability Compatibility: Can receive wireless video from all ranges of Bolt 4K XT and Bolt 4K LT transmitters (limited by shortest range device)
Power Input: 2-Pin Circular locking Connector 6-28 VDC
Battery: None, optional Gold or V mount battery plate
Nominal Power Consumption: 11 Watts
Operating Temperature: 0-40℃
Audio Output: Embedded SDI/HDMI Audio Output (2 Channel)
Bolt 6 LT 750 TX
Video Inputs: 3G-SDI SMPTE 424M standard / 75 Ω (BNC x 1) 1 x HDMI 1.4b Type-A receptacle
Video Outputs: 3G-SDI SMPTE 424M standard / 75 Ω (BNC x 1)
Sdi Ancillary Data Support: Supports reading metadata, timecode, and start/stop flags from most camera manufacturers.
Color Sampling: SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB/YCbCr 4:4:4 8-bit, 4:2:2 10-bit
Delay Tx To Rx: <0.001sec
Input Cross Conversion: Yes, HDMI to SDI (4Kp23.98-30 HDMI input is scaled and looped out as 1080p23.98-30 on SDI loopout)
Supported Resolutions: 4Kp23.98/24/25/29.97/30 (HDMI only) 1080p23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60
Video Compression: Visually Lossless
Color Correction: None
Audio Compression: 48kHz 24-bit PCM
Dimensions: 60mm x 103mm x 33mm
Weight: 206g (7.3oz)
Construction: Milled Aluminum(Chassis) and regulation-compliant PCB
Mountability: Multiple mounting options with 1/4"x20 and M3 holes
Configuration Interfaces: OSD with Menu, Joystick Navigation
Switches: On/Off Switch
Mobile App: Bolt App
Desktop App: Bolt Manager application for OSX & Windows
Usb Interface Functionality: Upgrade via Micro-USB
Bluetooth: 2.4 GHz
Antennas: 2 External 2dBi antennas (included)
Wireless: Non-DFS Frequencies: 5.190 ~ 5.230 GHz, 5.755 ~ 5.795 GHz, 5.945 ~ 6.425GHz DFS Frequencies: 5.270 ~ 5.670 GHz
Rf Channel Selection: Auto, Manual
Encryption: AES-256, RSA-1024 key exchange
Rf Power: 23 dbm EIRP
Range: Up to 750 ft, line of sight
Unicast Multicast: Can connect one Transmitter to up to 6 Receivers
Noise Rejection: Can coexist with WiFi and 5GHz cordless phones Can operate up to 6 sets in same location
Interoperability Compatibility: Can transmit wireless video to all ranges of Bolt 4K XT and Bolt 4K LT receivers (limited by shortest range device)
Power Input: 2-Pin Circular locking Connector 6-28 VDC
Battery: None, optional Sony/Canon dual battery plate
Nominal Power Consumption: 9 Watts
Operating Temperature: 0-40℃
Audio Input: Embedded SDI/HDMI Audio Input (2 Channel)
In the Box
1 x Bolt 6 LT 750 TX
1 x Bolt 6 LT 750 RX
1 x Lightstand Adapter ¼-20in
1 x Hot Shoe Adaptor
1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable
2 x SDI - BNC to BNC Cable, 10in
1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable
Data sheet
Specific References