Datavideo’s Brand-New PTR-10T MARK II is a Robotic Pan-Tilt Head that is Designed to Turn Any Small Size Video Camera or Block Cameras into a Robotic Camera

A sleek design fits seamlessly in your studio. With its weight of 3.4 Kg, it can be placed on any heavy-duty tripod or mounted on the wall and ceiling which brings up a lot of flexibility for your video production.

The PTR-10T MARK II can be controlled by the included IR controller, VISCA protocol controller, Datavideo RMC-180 Camera controller, RMC-300A Universal Remote-Control Panel, HS-1600T series and compatible with HDBaseT over Ethernet and other integration solutions such as Crestron.

Multiple Signal Interface
PTR-10T MARK II supports a lot of signal interface for passing through the remote head. Amongst these interfaces are SDI, HDMI, RS-232, RS-422, HDBaseT, Tally, and LANC.

Cost-Effective
PTR-10T MARK II makes the change from regular camcorder cameras to remote controlled PTZ very cost effective. Multi-camera remote operations can be handled by a single person. 

Wide Range of Compatible Cameras Supported
The PTR-10T MARK II implements LanC control that is compatible with a wide range of professional video camcorders, allowing you to select the best camcorders for your needs.

Light Weight, Strong, and Sturdy Design
With a weight of 3.4 kg, PTR-10T MARK II is built from aluminum alloy, making it a very sturdy base for your camera. It can support cameras up to 4 kilograms.

Diversified Controller Options
Compatible with Serial, Ethernet, and Lanc. Datavideo RMC-180 series, RMC-300A, and HS-1600T series will fit your need.

Support Your Cameras Up to 4 Kg Weight on PTR-10T MARK II
Super strong design. PTR-10T MARK II is built from aluminum alloy, making it a very sturdy base for your camera. 

Support 50 Preset Camera Shooting Positions
When your video production requires many different angles and positions, 50 preset camera positions will meet your needs. Using the IR remote allows you to call up to 50 presets at any time. When combined with the RMC-300A universal remote controller, the 14 physical buttons can be called at any time. When using the RMC-180 MARK II remote control, there are 4 physical buttons to call. 

PoE++ Supported
You do not need any battery mount on your camera when using PTR-10T MARK II. The PoE++ is building in the PTR-10T MARK II; No extra battery or power needed when operating.

Built-in Tally Light
With the big tally light in the front to show the status of your camera.

D-Tap Connector for DC Output
The D-tap connector is widely used in the broadcast industry as a standard for powering accessories from battery or mains power. This will make it easier for you to find a ready-made power cable for your specific camera. Included is a D-tap to DC 5.5mm with lock for Datavideo cameras.

Selectable DC
Voltage output for different cameras (7.4 / 8.4 / 10 / 12V )

Model Number: PTR-10T MARK II
Video Interface: HDMI x 1 , SDI x 1 , RJ45 x 1 (HDBaseT)
Video Output: 2160p 29.97/25 , 1080p 59.94/50 , 1080i 59.94/50 , 720p 59.94/50
Control Unit: RMC-180 , HS-1600T , HS-1600T Mark II , RMC-300A , VISCA Protocol Controller
IP Control: IR remote
Panning / Tilting Range: Pan: 340° , Tilt: ±45°
Panning / Tilting Speed: Pan: 0.12~15° /Sec , Tilt: 0.06~10° /Sec
Preset: Pan/Tilt position 50
Control Distance: 1,200M by RS422 , 100M by HDBaseT
Control Protocol: Sony VISCA , DVIP
Control Input: RS-422 , HDBaseT
Maximum Load: 4 KG Max
Control Output: RS-232 , RS-422 , BX-Lens , LanC
Power Requirement: DC 12V~ 18V, 3A (Without Camera) , DC 12V~ 18V, 5A (With Camera)
Power Supply: DC 12/10/8.4/7.4V, 24W Max
Operating Temp. Range: 0~40 C°
Operating Humidity Range: 10~80%
Storage Temp. Range: -10~60C°
Storage Humidity Range: 5~80%
Weight: 3.4 KG
Dimension (LxWxH): 230 x 190 x 300 mm
Optional accessories: EK-2 KIT , WM-10 , WM-11 , CM-10

What's in the Box
PTR-10T Mark II Main Unit x 1
DC 12V power adaptor x 1
AC cord x 1
IR remote control x 1
DC with lock to D-Tap cable x 1
HDMI cable x 1
SDI cable x 1
Remote cable (2.5mm phone-jack to mini-din 8pin) x 1
1/4” screw x 2
1/4” to 3/8” screw adaptor x 1