No Delay Switching
NSCaster X1 uses a 11.6-inch touchscreen and can be switched to the PGM by clicking on any of the video channels (SDI-1/2, HDMI-1/2, NET, DDR). Multi-channel signal switching at random and one-touch to start broadcast.
Professional Audio Input
NSCaster X1 uses XLR and TRS mixing port, and both XLR and TRS can be used, which guarantees its professionalism in essence.
NSCaster X1 has different scoreboard templates built in, which can display the scores of current live matches in real time. It can meet the real-time scores of various sports events such as basketball, football, table tennis, badminton and volleyball.
CG Overlay Function
NSCaster X1's CG panel can publish pictures to the PGM monitor interface. It has many built-in picture to choose from and you can also import external png/jpg format pictures. The position of the picture is adjustable and one single channel is able to support up to 12 pictures.
The layout of the broadcast screen has the picture-in-picture special effect and you quickly switch the content and sub-picture to be live stream more creative.
Audio Mixer Function
NSCaster X1 has built-in audio mixer and multiple channel mixing effects. It allows you to control the input and total output volume arbitrarily.
NSCaster X1 can record 6 channels (SDI-1/2, HDMI-1/2, NET/PGM channel recording) and contains recording power-off protection.
Multi-platform Live Streaming
Built-in live streaming of multiple live platforms (Mudu, AndLive, Facebook, YouTube, RTMP, etc.); you can easily stream to multiple live platforms with only one click.
With the NDDIP protocol, front-end devices such as smartphones and encoders do not need to be wired. Simply scan the QR code on the NSCaster X1 or enter the 6-digit director code to instantly connect to the NSCaster X1, making the live stream easier and faster.
NSCaster X1 supports operating PTZ camera such as zoom, focus, aperture operation, up, down, left, right, top left, bottom left, top right, bottom right movement. It also supports drag and drop arbitrary position, and quickly locates the target.
Auto loading device in LAN
The NDI devices in LAN can be loaded and automatically found by clicking the refresh button.
NDI®|HX Output (Optional function, need extra cost to enable)
It can select NDI output source, output bit-rate / bit-rate mode, etc.
1.Output source: SDI1 / SDI2 / HDMI1 / HDMI2 / PGM signal output can be selected, single selection or multiple selection.
2.Output control: start / stop NDI output.
3.Output parameters: including display name prefix, bit-rate, bit-rate mode and interval frame.
2x 3G-SDI - 2x HDMI
H264 over IP (RTMP/RTSP/UDP/M3U8)
1x 3G-SDI PGM - 1x HDMI PGM Output –
1x HDMI Display interface
1x AAC XLR/TRS balanced input L
1x AACXLR/TRS balanced input R
1x AAC XLR/TRS balanced output L
1x AAC XLR/TRS balanced output R
1x 3.5mm Jack monitor
SDI & HDMI AUDIO FORMAT
Linear PCM, 16bit, 48kHz, 2ch
1x USB3.0 and 1x USB 2.0
Gigabit Ethernet port
SDI INPUT FORMAT
INPUT SDI & HDMI RESOLUTIONS
SMPTE ST424 / SMPTE ST425-AB / SMPTE ST292 / SMPTE ST259-C
SDI & HDMI COLOUR FORMAT
8bit YCC 4:2:2
The range of frequency: 2.4-2.484GHZ
Transmitting Power: 100M:14dBM
Impact resistance 15g
Vibration resistance 10-100Hz 1.25g
Altitude Below 4000 meters
Supported PTZ Camera Protocol: ONVIF
CE Certificate Number: BCTC-FYC19062503C
FCC Part15.247 ANSI C63.10:2013 Report Nr. FY190703908E ¦ TCB FCC Rule 15C: 2AT7D-NS
ISO 9001 USA19Q42643R2M
ISO 14001 USA19E42644R1M
Documents available up on request as PDF
(W x H x D) 294mm*193mm*54mm
Weight 1.25KG / with Packaging 5KG
Chassis portable with 11.6 inch touchscreen
HS code 8471309000
Power Consumption 23.6Watts
Input voltage DC 19V
Frequency range 2.4-2.484GHZ
External Power supply Input 100~240V AC
Operating Conditions -10-50℃ 8% to 90% RH (non-condensing)
Storage Conditions -20-70℃ 8% to 90% RH (non-condensing)
CPU TWO core, ARM 1.1 GHZ
Storage Capacity 2G RAM- 512 MB ROM 250G M.2
4G module LTE FDD: B1/B3/B5/B8
LTE TDD: B38/B39/B40/B41
WIFI module IEEE 802.11n, IEEE 802.11g,