R9, the saturated-red sample that decides how lips, flushed skin and dark wood reproduce on camera, is where SWIT concentrated its phosphor work for the PL-E90L. The panel is rated CRI Ra 99 and TLCI 99, and the SWIT PL-E90L 3KIT puts three of them on the road together with stands, mains adaptors and a wheeled trolley case.
Each head is a 90 W bi-colour LED panel in a long strip format, its emitting surface roughly seven and a half times longer than it is wide. Stood upright, it lights a person from head to waist in one even sweep. Laid flat, it turns into a soft edge along a set wall or a discreet rim behind a seated guest.
The softness does not come from a thick diffuser. Inside the frame, 480 SMD LEDs are mounted along the inner edge rather than facing the subject, and SWIT's 90° light-guide board, marked with precisely spaced laser dots, turns their output forward and spreads it across the whole face. The front therefore reads as one smooth surface with a 70° beam, and the housing stays remarkably slim for a 90 W fixture.
Rated output is 2000 lux at 1 m. Two LED families, 2700 K and 6500 K, are mixed so that the full 90 W remains available anywhere in the 2700–6500 K range, not just at a midpoint. Dimming runs from 0 to 100 % through PWM digital control, with no visible flicker.
Small details save real minutes on set. A short press on the colour-temperature knob jumps straight to 2700, 3200, 4500, 5600 or 6500 K, and a short press on the dimmer moves in 10 % steps. Matching a tungsten practical or the daylight coming through an office window takes a click, not a slow dial search.
Instead of €2,697.00
R9, the saturated-red sample that decides how lips, flushed skin and dark wood reproduce on camera, is where SWIT concentrated its phosphor work for the PL-E90L. The panel is rated CRI Ra 99 and TLCI 99, and the SWIT PL-E90L 3KIT puts three of them on the road together with stands, mains adaptors and a wheeled trolley case.
Each head is a 90 W bi-colour LED panel in a long strip format, its emitting surface roughly seven and a half times longer than it is wide. Stood upright, it lights a person from head to waist in one even sweep. Laid flat, it turns into a soft edge along a set wall or a discreet rim behind a seated guest.
The softness does not come from a thick diffuser. Inside the frame, 480 SMD LEDs are mounted along the inner edge rather than facing the subject, and SWIT's 90° light-guide board, marked with precisely spaced laser dots, turns their output forward and spreads it across the whole face. The front therefore reads as one smooth surface with a 70° beam, and the housing stays remarkably slim for a 90 W fixture.
Rated output is 2000 lux at 1 m. Two LED families, 2700 K and 6500 K, are mixed so that the full 90 W remains available anywhere in the 2700–6500 K range, not just at a midpoint. Dimming runs from 0 to 100 % through PWM digital control, with no visible flicker.
Small details save real minutes on set. A short press on the colour-temperature knob jumps straight to 2700, 3200, 4500, 5600 or 6500 K, and a short press on the dimmer moves in 10 % steps. Matching a tungsten practical or the daylight coming through an office window takes a click, not a slow dial search.
We ship across the EU for €20, free over €1,000.
B2B sales only, prices excl. VAT.
Official EU distribution and warranty.
Secure online payments via Stripe.
Send your enquiry via the form or email avgear@avgear.shop
There is no fan. Heat leaves through the metal housing, so the PL-E90L stays completely silent even a metre from the talent, which sound recordists notice in carpeted hotel suites, home offices and quiet documentary locations.
Power sits at the back of every unit. A 4-pin XLR socket accepts 11–36 V DC, and the built-in V-mount battery plate lets a single battery run one panel away from mains, with a Gold Mount plate available as an option. Each light in the kit also has its own AC-DC adaptor. On a rooftop, inside a factory hall or in a building with doubtful wiring, the crew clips on batteries and keeps shooting.
For control, the rear panel carries a 5-pin XLR DMX512 input with a through output, plus an LCD that reports dimmer level, colour temperature, the DMX address and battery information. Each head uses only two channels, dimmer then colour temperature, so the complete kit occupies six addresses on a console. A 5 V USB output feeds a wireless DMX receiver directly, which removes another battery pack from the stand.
No desk on location? A long press on the colour knob switches from console mode to interactive (CH) mode. Panels set to the same channel and linked with DMX cable then follow each other: adjust one and the rest track it, with no master unit to designate. A long press on the dimmer opens DMX address setting.
Mechanically the fixture keeps things simple. The stand connector rotates through 360° and tilts through 180°, and two-leaf metal barn doors ship fitted to every panel, removable with four screws when a flat profile matters more than spill control. The trolley case holds three PL-E90L heads with barn doors, three rotatable stand connectors, three light stands and three AC-DC adaptors.
SWIT has also had the PL-E90L tested to IEC 62471 and classified in the exempt group, with no photobiological hazard. Some corporate and event clients ask for that kind of documentation before talent spends a full day in front of a fixture, and it slots straight into a venue's risk assessment.
The set earns its place in two-person interviews built from a key, a fill and a vertical edge light; in standing-presenter pieces where a tall soft source flatters the full figure; in low-ceilinged meeting rooms and compact studios where a large softbox simply will not fit; and in livestreamed talks or webinars that run for hours on stable colour. For permanent grid installations, SWIT also offers a hoisting variant, the PL-E90LH, with a short ceiling bracket.
Seen from the fleet side, the SWIT PL-E90L 3KIT gives a production company three identical heads with the same colour metrics, the same two-channel DMX footprint and a battery mount many camera departments already stock. A corporate testimonial on Monday and a broadcast interview on Thursday can start from the same presets, and the colourist starts from cleaner skin tones.
| Model | PL-E90L |
|---|---|
| LED | 480pcs SMD LEDs |
| illuminance | 2000Lux @ 1m |
| Beam angle | 70° |
| Color Temperature | 2700K～6500K |
| CRI | 99 |
| TLCI | 99 |
| Power | 90W |
| Working voltage | DC11V～36V |
| Lighting area | 781×104mm |
| Net weight(without packaging) | 4.9kg |
| Product dimensions(without packaging) | 839×163×21mm |
| Gross weight(with packaging) | 9.7kg |
| Package dimensions | 935×203×272mm |
Data sheet
Specific References
