Netgear M4250-40G8XF-PoE+ (GSM4248PX-100EUS) AV Line Managed Switch
€3,490.00
Netgear M4250‑40G8XF‑PoE+ brings professional audio‑visual networking into a single 1 RU switch built for demanding AV‑over‑IP infrastructures....
Running AV-over-IP at scale makes the switch a load-bearing element of your signal chain. The Netgear M4250-10G2XF-PoE+ (GSM4212PX-100EUS) was built with that in mind — hardware and software shaped by working AV professionals, not adapted from a generic enterprise template. Whether it sits at the edge of a live production rig, inside a broadcast studio rack, or in a fixed installation distributing video across multiple zones, it speaks the same language as the equipment around it.
Eight rear-facing Gigabit PoE+ RJ-45 ports share a 240W total PoE budget — up to 30W per port — enough to simultaneously power PTZ cameras, NDI encoders, Dante audio endpoints, IP intercoms, and AV-over-IP decoders. Two additional 1G copper ports and two 10G SFP+ uplink slots handle inter-switch connections cleanly. The switching fabric delivers 60 Gbps capacity at 44.64 Mpps, with latency under 0.84µs at 10G and 12KB jumbo frame support — parameters that hold when pushing lightly compressed or uncompressed video across all ports.
The AV UI — NETGEAR's browser-based interface built for AV installers — arrives pre-loaded with port-level profiles for NDI, SDVoE, Dante, AES67, Q-SYS, NVX, SVSI, Kramer KDS, Atlona, and ZeeVee. Reassigning a port from one protocol to another takes seconds rather than a CLI session. NETGEAR IGMP Plus™ automates multicast across M4250, M4300, and M4500 switches in star or spine-and-leaf topologies, removing the need for L3 PIM routing in most scenarios. PTPv2 Transparent Clock (1-step, end-to-end) keeps audio and video streams synchronized — a requirement in Dante and AES67 environments where timing drift affects alignment.
The rear-facing port layout fits standard AV rack practice, with cables routing cleanly to the back. Alternate mounting ears allow a ~5 cm recessed installation when front cabling is the only option. Fans are software-managed and shut off at appropriate PoE load and ambient temperature — worthwhile in recording spaces or broadcast floors where noise matters. GSM4212PX-100EUS also includes Layer 3 with static routing, RIP, and PIM-SM/DM/SSM multicast, 4,096-VLAN capacity, MAC/IPv4/VLAN ACLs, and a lifetime limited warranty.
We ship across the EU for €20, free over €1,000.
B2B sales only, prices excl. VAT.
Official EU distribution and warranty.
Secure online payments via Stripe.
Send your enquiry via the form or email avgear@avgear.shop
Designed with input from industry professionals, this switch is engineered for 1G AV over IP. Enjoy rear-facing ports that ensure a clean integration in AV racks, and pre-configuration for out-of-the-box functionality.
Groundbreaking AV GUI
A simplified user interface makes it easy to assign configuration profiles to each port.
Multicast in an Instant
NETGEAR IGMP Plus™ provides multicast functionality right out of the box for most AV over IP applications.
Sleek, Quiet Design
Less fan noise, and mounting ears included for under-table or wall mounting.
Automatic Configuration
Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.
Fast, Easy, Configuration for AV Pros
A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.
Focus on The Event Not Fan Noise
Most models have quiet mode which greatly reduces fan noise, and some models are even fanless.
Designed for AV Over IP right out of the box
With built-in NETGEAR IGMP Plus™, there's little-to-no setup required for flawless Video over IP delivery. Enable multicasting right out of the box.
Refined Design Provides Mounting Flexibility
Clean lines and port activity status is featured in the front of the switch, while cabling is neatly in the back. Universal mounting options allow VESA mounting or in standard racks.
Primary Port Speed : 1 Gigabit
Number of Ports : 12 (10x 1G, 2x SFP+)
PoE Ports / Budget : 8 PoE+ (30W/port), 240W Budget
IGMP Support : Enhanced (NETGEAR IGMP Plus™)
Jumbo Frame Support : Yes, up to 12kb
Acoustics : Fanless or 39.22dB@25ºC
Power Consumption : With PoE: 306.4W/1046.050Btu/hr; Without PoE: 25W/85.35Btu/hr; Standby without any port connection: 12.96W/44.245Btu/hr
AVB Support : Yes. Electronic license required, activation key sent via email (AVB4212PX-10000S)
Third party support : Domotz
Dimensions (WxDxH) : 440 x 200 x 43.2mm
Weight : 2.9Kg (6.39lb)
What's in the Box :
M4250-10G2XF-PoE+ (GSM4212PX)
Power cord(s)
Console USB Type-C and RJ45-DB9 cables
Rack-mounting standard brackets
Longer brackets for recessed mounting
Rubber footpads for tabletop installation
Installation guide
Data sheet
Specific References