Teradek Bolt 6 Monitor Module 750 RX V-Mount brings zero-delay wireless monitoring to SmallHD Smart 7 (Cine 7, Indie 7, 702 Touch). Working across 6 GHz (U-NII-5) and 5 GHz, it keeps a stable link up to 750 ft / 230 m line-of-sight. The low-profile V-Mount backplate passes power to the monitor for a single-battery setup, trimming cables and keeping handheld rigs compact and balanced.
The receiver handles 4K30 with 10-bit 4:2:2 HDR and outputs over a single HDMI port. Latency stays under 0.001 s, preserving critical cues for focus, graphics, and switching. Link security is enforced by AES-256 with RSA-1024 pairing; timecode and run/stop metadata traverse the link for accurate logging. One TX can feed up to six RX, while advanced noise rejection maintains image integrity around congested sets and venues. Supported formats cover UHD 3840×2160 at 23.98–30p and 1080p up to 60p with embedded 48 kHz LPCM audio. Channel bandwidth is 40 MHz and typical RF output ~21 dBm EIRP, with operation rated 0–40 °C and 6–18 V DC via locking 2-pin input. LOS spec: clear.
Control and RF diagnostics run inside the SmallHD UI or the Bolt App via Bluetooth: spectrum scan, channel selection (auto/manual), pairing over 6 GHz + 5 GHz, and status. Cross-compatibility with the Bolt 4K ecosystem on 5 GHz protects existing kits, while the 6 GHz band opens additional clear channels for studio floors, soundstages, OB vans, and multi-camera live streams in regions where available.
Hardware is compact (122 × 94 × 27 mm; 292 g) with a milled-aluminum chassis, 6–18 V DC input and typical draw around 6 W. An internal antenna array and the integrated V-Mount plate keep alignment secure and cabling minimal. For cinema crews, broadcast trucks, and live-event teams, Teradek’s Bolt 6 Monitor Module 750 RX V-Mount delivers dependable 4K HDR monitoring, frame-accurate performance, and a streamlined, pro-ready build.
Teradek Bolt 6 Monitor Module 750 RX V-Mount brings zero-delay wireless monitoring to SmallHD Smart 7 (Cine 7, Indie 7, 702 Touch). Working across 6 GHz (U-NII-5) and 5 GHz, it keeps a stable link up to 750 ft / 230 m line-of-sight. The low-profile V-Mount backplate passes power to the monitor for a single-battery setup, trimming cables and keeping handheld rigs compact and balanced.
The receiver handles 4K30 with 10-bit 4:2:2 HDR and outputs over a single HDMI port. Latency stays under 0.001 s, preserving critical cues for focus, graphics, and switching. Link security is enforced by AES-256 with RSA-1024 pairing; timecode and run/stop metadata traverse the link for accurate logging. One TX can feed up to six RX, while advanced noise rejection maintains image integrity around congested sets and venues. Supported formats cover UHD 3840×2160 at 23.98–30p and 1080p up to 60p with embedded 48 kHz LPCM audio. Channel bandwidth is 40 MHz and typical RF output ~21 dBm EIRP, with operation rated 0–40 °C and 6–18 V DC via locking 2-pin input. LOS spec: clear.
Control and RF diagnostics run inside the SmallHD UI or the Bolt App via Bluetooth: spectrum scan, channel selection (auto/manual), pairing over 6 GHz + 5 GHz, and status. Cross-compatibility with the Bolt 4K ecosystem on 5 GHz protects existing kits, while the 6 GHz band opens additional clear channels for studio floors, soundstages, OB vans, and multi-camera live streams in regions where available.
Hardware is compact (122 × 94 × 27 mm; 292 g) with a milled-aluminum chassis, 6–18 V DC input and typical draw around 6 W. An internal antenna array and the integrated V-Mount plate keep alignment secure and cabling minimal. For cinema crews, broadcast trucks, and live-event teams, Teradek’s Bolt 6 Monitor Module 750 RX V-Mount delivers dependable 4K HDR monitoring, frame-accurate performance, and a streamlined, pro-ready build.
We ship all over the European Union for €20, free shipping on orders over €1,000.
Our offer is aimed only to B to B Customers, all prices are exclusive of tax.
Secure online payments via Stripe.
Send your enquiry via the form or email avgear@avgear.shop
Technical Specs
Video Outputs: 1 x HDMI 1.4b Type-A receptacle
Sdi Ancillary Data Support: Supports reading metadata, timecode, and start/stop flags from most camera manufacturers.
Color Sampling: SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB 4:4:4, 8-bit
Delay Tx To Rx: <0.001sec
Supported Resolutions: 4Kp23.98/24/25/29.97/30 1080p23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60
Video Compression: Visually Lossless
Color Correction: None
Audio Compression: 48kHz 24-bit PCM
Audio Output: Embedded HDMI Audio Output (2 Channel)
Dimensions: 122mm x 94mm x 27mm
Weight: 292g (10.3oz)
Construction: Milled Aluminum(Chassis) and regulation-compliant PCB
Mountability: SmallHD 7" Monitor
Configuration Interfaces: SmallHD Monitor UI
Mobile App: Bolt App
Usb Interface Functionality: SmallHD Monitor UI 2x 5pin Locking Connector CCU (Host)
Bluetooth: Via SmallHD Monitor
Antennas: 5 External 2 dBi antennas (included)
Wireless: Non-DFS Frequencies: 5.190 ~ 5.230 GHz, 5.755 ~ 5.795 GHz, 5.945 ~ 6.425GHz DFS Frequencies: 5.270 ~ 5.670 GHz
Rf Channel Selection: Auto, Manual
Encryption: AES-256, RSA-1024 key exchange
Rf Power: 21 dbm EIRP
Range: Up to 750 ft, line of sight
Unicast Multicast: Can connect one Transmitter to up to 6 Receivers
Noise Rejection: Can coexist with WiFi and 5GHz cordless phones Can operate up to 6 sets in same location
Interoperability Compatibility: Can receive wireless video from all ranges of Bolt 4K XT and Bolt 4K LT transmitters (limited by shortest range device)
Power Input: 2-Pin Circular locking Connector 6-18 VDC
Battery: V-Mount
Nominal Power Consumption: 6 Watts
Operating Temperature: 0-40℃
In the Box
1 x Bolt 6 Monitor Module 750 RX V Mount
5 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA
1 x HDMI Adapter Bolt 4K RX Monitor Module
Data sheet
Specific References
