Teradek Bolt 6 XT 750 TX/RX Deluxe Set Gold-Mount delivers zero-delay (<1 ms) wireless video with access to the newly opened 6 GHz band while remaining cross-compatible with the Bolt 4K family on 5 GHz. The kit combines a 12G-SDI/HDMI transmitter and receiver with integrated Gold-Mount plates to move 4K60, 10-bit 4:2:2 HDR up to 750 ft (≈228 m) line-of-sight. AES-256 with RSA-1024 exchange, manual/auto channel selection, and a built-in spectrum analyzer (via Bluetooth app.) harden links on congested sets.
I/O is comprehensive: HDMI 2.0 and 12G-SDI on both ends, SDI loop-through on TX, and SDI + HDMI outputs on RX. Ancillary data is preserved end-to-end—including timecode, start/stop flags. The RX provides format scaling, frame-rate conversion, and an on-device 17×17×17 3D LUT pipeline (10-bit) so director’s monitors match the show look even when camera and display standards differ. One TX links to up to six receivers, and multiple Bolt 6 sets can operate in the same venue without crosstalk.
Power, RF and control suit field work. Both units accept 2-pin LEMO 6–28 VDC and ship with D-Tap leads; the Deluxe Set adds nine RP-SMA antennas, 12G-SDI cables, hot-shoe and light-stand adapters, and a hard case. RF covers 5 GHz/6 GHz with 40-MHz channels; an eye-pattern SDI tool assists cable checks; reconnection is fast after interruptions. Milled aluminum housings and quiet thermals fit camera-top, handheld or village builds. More RF.
Choose the Teradek Bolt 6 XT 750 TX/RX Deluxe Set Gold-Mount for OB vans, studio floors, multi-camera reality, Steadicam and live streaming pipelines with predictable spectrum use and ultra-low latency. You get the reach of 228 m with the flexibility of 12G-SDI/HDMI, HDR accuracy, and Bolt 4K interoperability—ready for today’s 4K60 sets.
Teradek Bolt 6 XT 750 TX/RX Deluxe Set Gold-Mount delivers zero-delay (<1 ms) wireless video with access to the newly opened 6 GHz band while remaining cross-compatible with the Bolt 4K family on 5 GHz. The kit combines a 12G-SDI/HDMI transmitter and receiver with integrated Gold-Mount plates to move 4K60, 10-bit 4:2:2 HDR up to 750 ft (≈228 m) line-of-sight. AES-256 with RSA-1024 exchange, manual/auto channel selection, and a built-in spectrum analyzer (via Bluetooth app.) harden links on congested sets.
I/O is comprehensive: HDMI 2.0 and 12G-SDI on both ends, SDI loop-through on TX, and SDI + HDMI outputs on RX. Ancillary data is preserved end-to-end—including timecode, start/stop flags. The RX provides format scaling, frame-rate conversion, and an on-device 17×17×17 3D LUT pipeline (10-bit) so director’s monitors match the show look even when camera and display standards differ. One TX links to up to six receivers, and multiple Bolt 6 sets can operate in the same venue without crosstalk.
Power, RF and control suit field work. Both units accept 2-pin LEMO 6–28 VDC and ship with D-Tap leads; the Deluxe Set adds nine RP-SMA antennas, 12G-SDI cables, hot-shoe and light-stand adapters, and a hard case. RF covers 5 GHz/6 GHz with 40-MHz channels; an eye-pattern SDI tool assists cable checks; reconnection is fast after interruptions. Milled aluminum housings and quiet thermals fit camera-top, handheld or village builds. More RF.
Choose the Teradek Bolt 6 XT 750 TX/RX Deluxe Set Gold-Mount for OB vans, studio floors, multi-camera reality, Steadicam and live streaming pipelines with predictable spectrum use and ultra-low latency. You get the reach of 228 m with the flexibility of 12G-SDI/HDMI, HDR accuracy, and Bolt 4K interoperability—ready for today’s 4K60 sets.
We ship all over the European Union for €20, free shipping on orders over €1,000.
Our offer is aimed only to B to B Customers, all prices are exclusive of tax.
Secure online payments via Stripe.
Send your enquiry via the form or email avgear@avgear.shop
Technical Specs
Bolt 6 XT 750 12G-SDI/HDMI Wireless RX Gold-Mount
Video Outputs: 12G-SDI SMPTE 2082-1 standard / 75 Ω (BNC x 1) 1 x HDMI 2.0 Type-A receptacle
Sdi Ancillary Data Support: Supports transmitting metadata, timecode, and start/stop flags from most camera manufacturers.
Color Sampling: SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB 4:4:4, 8-bit
Delay Tx To Rx: <0.001sec
Output Video Scaling: Yes, Framerate and Resolution Scaling
Supported Resolutions: 4Kp23.98/24/25/29.97/30/50/59.94/60 1080p23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60
Video Compression: Visually Lossless
Color Correction: 17x17x17 3D LUT (supports 10-bit color)
Audio Compression: 48kHz 24-bit PCM
Dimensions: 112 x 139 x 27 mm
Weight: 430g (15.2 Oz)
Construction: Milled Aluminum(Chassis) and regulation-compliant PCB
Mountability: Multiple mounting options with 1/4"x20 and 3/8"x16 holes
Configuration Interfaces: OSD with Menu, Joystick Navigation
Switches: On/Off Switch
Usb Interface Functionality: Upgrade via USB-C 5pin Locking Connector CCU
Bluetooth: 2.4 GHz
Antennas: 5 External 2 dBi antennas (included)
Wireless: Non-DFS Frequencies: 5.190 ~ 5.230 GHz, 5.755 ~ 5.795 GHz, 5.945 ~ 6.425GHz DFS Frequencies: 5.270 ~ 5.670 GHz
Rf Channel Selection: Auto, Manual
Encryption: AES-256, RSA-1024 key exchange
Rf Power: 21 dbm EIRP
Range: Up to 750 ft, line of sight
Unicast Multicast: Can connect one Transmitter to up to 6 Receivers
Noise Rejection: Can coexist with WiFi and 5GHz cordless phones Can operate up to 6 sets in same location
Power Input: 2-Pin Circular locking Connector 6-28 VDC
Battery: Gold-Mount battery plate
Battery Runtime: 18 Watts
Operating Temperature: 0-40℃
Audio Output: Embedded SDI/HDMI Audio Output (2 Channel)
Bolt 6 XT 750 12G-SDI/HDMI Wireless TX Gold-Mount
Video Inputs: 12G-SDI SMPTE 2082-1 standard / 75 Ω (BNC x 1) 1 x HDMI 2.0 Type-A receptacle
Video Outputs: 12G-SDI SMPTE 2082-1 standard / 75 Ω (BNC x 1)
Sdi Ancillary Data Support: Supports transmitting metadata, timecode, and start/stop flags from most camera manufacturers.
Color Sampling: SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB 4:4:4, 8-bit
Delay Tx To Rx: <0.001sec
Input Cross Conversion: Yes, HDMI to SDI
Supported Resolutions: 4Kp23.98/24/25/29.97/30/50/59.94/60 1080p23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60
Video Compression: Visually Lossless
Color Correction: None
Audio Compression: 48kHz 24-bit PCM
Dimensions: 132 x 91 x 27 mm
Weight: 344g (12.1 Oz)
Construction: Milled Aluminum(Chassis) and regulation-compliant PCB
Mountability: Multiple mounting options with 1/4"x20 and M3 holes
Configuration Interfaces: OSD with Menu, Joystick Navigation
Switches: On/Off Switch
Usb Interface Functionality: Upgrade via USB-C 5pin Locking Connector CCU
Bluetooth: 2.4 GHz
Antennas: 4 External 2dBi antennas (included)
Wireless: Non-DFS Frequencies: 5.190 ~ 5.230 GHz, 5.755 ~ 5.795 GHz, 5.945 ~ 6.425GHz DFS Frequencies: 5.270 ~ 5.670 GHz
Rf Channel Selection: Auto, Manual
Encryption: AES-256, RSA-1024 key exchange
Rf Power: 23 dbm EIRP
Range: Up to 750 ft, line of sight
Unicast Multicast: Can connect one Transmitter to up to 6 Receivers
Noise Rejection: Can coexist with WiFi and 5GHz cordless phones Can operate up to 6 sets in same location
Power Input: 2-Pin Circular locking Connector 6-28 VDC
Battery: Gold-Mount battery plate
Battery Runtime: 20 Watts
Operating Temperature: 0-40℃
Audio Input: Embedded SDI/HDMI Audio Input (2 Channel)
In the Box
1x Bolt 6 XT 750 TX Gold-Mount
1x Bolt 6 XT 750 RX Gold-Mount
2x Bolt 6 XT front battery cover plate
1x Bolt 4K TX mounting bracket
1x light stand adapter 3/8 inch
1x hot shoe adapter
4x flat head Phillips screws
2x hexagon socket screws A S, M3 x 16 mm
1x hexagon key 2.5 mm size 3-5/8" length
2x (bit 118) 2-pin connector to PowerTap - 18 in/46 cm cable
1x (bit 718) 2-pin plug to 2-pin plug (Alexa) 18in/46cm cable
2x SDI 12G BNC to BNC 18 inch/46 cm cable
1x Teradek large case - Bolt XT TX/2RX
1x power supply 2-pin to 30W AC adapter - 1.8m cable
9x antenna 2dBi rigid V 4.9-7.3Ghz RP-SMA
1x wooden camera - universal ultra arm monitor mount (combo 1/4-20 & 3/8-16, 5")
1x USB 2.0 Type A plug to USB Type C plug - 1 m cable
2x Bolt 6 XT rear battery cover plate
Data sheet
Specific References
