Marshall CV620-WI2 PTZ Camera

    CV620-WI2
    Price: €1,999.00
    No tax
    We offer EU-wide sales, invoicing for VAT-free intra-community delivery.
    Available from supplier (Delivery time to be confirmed.)

    Marshall CV620-WI2 is a white Full HD PTZ camera for fixed installations where clean coverage, repeatable framing and low operator load matter more than camera count. It uses a 2 MP Sony IMX327 1/2.8-inch sensor and delivers up to 1080p at 60 fps, with additional 1080p/50, 1080p/25, 1080p/30 and 720p frame-rate options for broadcast, streaming and corporate AV systems. The optical block covers 5.33-110 mm with 20x optical zoom, so the same camera can hold a wide room shot and then move to a tight speaker frame without changing position. Horizontal viewing angle is specified at 57° wide and about 3.7° tele.

    For integrators and video teams, the key advantage is simultaneous signal delivery: 3G-SDI, HDMI, USB and IP outputs are available at the same time, which simplifies mixed environments such as SDI production switchers, USB-based conferencing PCs and IP contribution paths running in parallel. The IP stack supports protocols used in real deployments, including RTSP, RTMP, SRT, ONVIF, MPEG-TS and Multicast, and control is available via VISCA, VISCA over IP, ONVIF, RS-232, RS-422 and web GUI/IR control. Marshall also lists Free-D and CGI command support, which is relevant for tracked virtual sets and automation-heavy rooms.

    The pan/tilt mechanism provides a wide travel range (±170° pan and -30° to +90° tilt), with fast movement up to 225°/s and quiet motor behavior for live production use. Image tuning includes WDR, 3D noise reduction, image flip, manual or automatic exposure/white balance/gain, plus 128 presets for fast camera recall. A built-in tally light is useful in studios, lecture capture and council chambers, where presenters need a clear on-air indicator.

    Marshall positions the CV620 series for broadcast production, live events, houses of worship, education, courtrooms and government spaces, and this fits the specification well. In practice, Marshall CV620-WI2 PTZ camera works as a main camera for small studios, a side-angle unit in hybrid event rooms, a ceiling or wall-mounted source for worship streaming, or a controllable camera for university lecture capture. Power can be supplied by 12 V or PoE, and the Ethernet link can carry control, video, audio and tally in one cable run, which keeps installation cleaner in permanent AV racks and stage environments.

    UE Shipping

    We ship across the EU for €20, free over €1,000.

    B2B Shop

    B2B sales only, prices excl. VAT.

    Safe Shopping

    Official EU distribution and warranty.

    Secure checkout

    Secure online payments via Stripe.

    Individual quotation

    Send your enquiry via the form or email avgear@avgear.shop

    Marshall CV620-BI2/WI2 features a 20x optical zoom range and flexible IP, 3GSDI, USB, and HDMI simultaneous outputs with clear Full-HD images up to 1920x1080p at 60fps. Remote adjust and match settings include Iris, Zoom, Pan/Tilt, White Balance, Exposure, Pedestal, and many more over long distances via IP, VS-PTC-300 controller, Video Management Software (VMS), Software GUI, OBS Plugins/Docks, vMix and compatible 3rd party control decks.

    Key features

    • 2 Megapixel Full-HD Sensor (Sony 1/2.8")
    • 20x Optical zoom (5.3mm~110mm) starting at 60° H.AOV
    • 340° pan and 120° tilt range with various PT selectable speeds
    • 3GSDI, HDMI, USB, and IP (H.264) available outputs
    • IP formats: HTTP, RTSP, RTMP, RTP, TCP, UDP, SRT, MPEG-TS, ONVIF, Multicast, RTMPS
    • Full-HD: 1920x1080p, and 1280x720p
    • 60, 50, 30, 25 frames per second
    • 3.5mm TRS Stereo Audio (Mic/Line)
    • 12V Power cable included (10W max) or PoE+ (10W max)
    • Operating Temp: 0 to 40°C, Storage Temp: -20 to 60°C
    • Free-D protocol support and CGI protocol commands

    Crisp Full-HD Video Output
    The CV620-BI2/WI2 cameras are built around a professional-grade, 2-Megapixel 1/2.8-inch Sony sensor, with smooth 20x Optical Zoom (5.3~110mm) outputting HD video up to 1920x1080p60fps, 1920x1080i and 1280x720p.

    Versatile Camera Position
    The CV620-BI2/WI2 cameras are equipped with synchronous pan, tilt, and zoom motors with various speed adjustment for smooth and silent camera movements during operation. A 20X optical zoom block provides flexibility from 5.3mm to 110mm, maintaining image crispness in wide and tight shots.

    Easy I/O and Control
    Simultaneous IP, 3GSDI, USB, and HDMI outputs with command options of Visca over IP, RS-422, RS-232, or IR remote control provide flexibility for inclusion in most modern workflows. Also, easy one-cable to camera setup via IP ethernet cable for control, video, audio, tally and PoE+ (power).

    Flexible Control Sources
    Marshall IP PTZ Cameras are setup to be controlled from IR remote (included), VS-PTC-300 or VS-PTC-200 controllers, Video Management Software (VMS), Software GUI through web, OBS plugins/docks, vMix and other 3rd party software/hardware control decks.

    Camera Applications:
    Broadcast, Production, Live Events, Sportscast, Government, Courtroom, House of Worship, College/University, Front of Stage, Confidence, Observation

    CV620-BI2 / CV620-WI2 Specifications:
    Sensor: SONY IMX327
    Video Format:
    1080p/60,1080p/30
    1080p/50,1080p/25
    720p/60, 720p/30
    720P/50, 720P/25
    Video Output (HD) Interface: 3G-SDI / HDMI / Ethernet/USB
    Optical Zoom: 20X max
    Horizontal Viewing Angle: Wide=57° (+/-5%), Tele ≒3.7° (+/-5%)
    Panning Angle: +/-170°
    Panning Speed: 225°/sec
    Tilting Angle: -30 °~+90°
    Tilting Speed: 225°/sec
    Aperture: Fno1.6~Fno3.8
    Focal Length (lens spec): 5.33~110 mm
    Shutter Speed: 1/25 to 1/10,000 s
    Minimum Object Distance: ∞~1.5m
    Focus System: Auto / Manual / Smart AF(TBD)
    Gain Control: Auto / Manual
    White Balance: Auto / Manual
    Exposure Control: Auto / Manual
    WDR: Yes
    3D NR: Yes
    Image Flip: Yes
    Preset Positions: 128
    Control Interface: VISCA/ VISCA over IP/ Onvif/ Webpage/ IR Remote
    Control Protocol: VISCA / VISCA IP /ONVIF / UVC /HTTP CGI command/UAC
    Tally Light: Yes
    PoE: IEEE 802.3af(PoE)
    Video Stream: HTTP,RTSP,RTMP,RTP, TCP, UDP,SRT,MPEG-TS,ONVIF, Multicast、RTMPS、ONVIF (Profile S) can support Windows 10
    Video Compression: H264: 25/30/50/60 fps 1080p/720p, MJPEG 1080p 30/15 fps
    Audio Input: Line in/ Mic in
    Audio Output: Ethernet / SDI / HDMI/USB
    IR Pass-through: No
    IR Receiver: Yes
    IR Remote Control: Yes
    Power Consumption: DC : ≦11W, PoE : ≦12.9W
    Weight: 1.9 Kg
    Dimensions: 181(L)x195(H)x174(W)
    Operating Temperature: 0~40˚C
    Storage Temperature: -20°C ~ +60°C

    CV620-WI2

    Data sheet

    Video Output
    HDMI
    RJ-45 (IP)
    SDI
    USB
    Audio Input
    Mini Jack 3.5mm
    Audio Output
    HDMI Embedded
    RJ-45
    SDI Embedded
    USB
    Max Output Resolution
    1080p 50/60 fps
    Control protocol for PTZ cameras
    ONVIF
    RS-232
    RS-422
    UVC
    VISCA
    VISCA IP
    Network Connection
    Ethernet
    Sensor Size
    1/2.8"
    Optical Zoom
    20x
    PoE Technology
    Yes
    Auto-Tracking
    No
    Tally Light
    Yes

    Specific References

    ean13
    801813233704
    mpn
    CV620-WI2

    Contact us

    optional

    Reviews

    Write your review

    Marshall CV620-WI2 PTZ Camera

    Marshall CV620-WI2 is a white Full HD PTZ camera for fixed installations where clean coverage, repeatable framing and low operator load matter more than camera count. It uses a 2 MP Sony IMX327 1/2.8-inch sensor and delivers up to 1080p at 60 fps, with additional 1080p/50, 1080p/25, 1080p/30 and 720p frame-rate options for broadcast, streaming and corporate AV systems. The optical block covers 5.33-110 mm with 20x optical zoom, so the same camera can hold a wide room shot and then move to a tight speaker frame without changing position. Horizontal viewing angle is specified at 57° wide and about 3.7° tele.

    For integrators and video teams, the key advantage is simultaneous signal delivery: 3G-SDI, HDMI, USB and IP outputs are available at the same time, which simplifies mixed environments such as SDI production switchers, USB-based conferencing PCs and IP contribution paths running in parallel. The IP stack supports protocols used in real deployments, including RTSP, RTMP, SRT, ONVIF, MPEG-TS and Multicast, and control is available via VISCA, VISCA over IP, ONVIF, RS-232, RS-422 and web GUI/IR control. Marshall also lists Free-D and CGI command support, which is relevant for tracked virtual sets and automation-heavy rooms.

    The pan/tilt mechanism provides a wide travel range (±170° pan and -30° to +90° tilt), with fast movement up to 225°/s and quiet motor behavior for live production use. Image tuning includes WDR, 3D noise reduction, image flip, manual or automatic exposure/white balance/gain, plus 128 presets for fast camera recall. A built-in tally light is useful in studios, lecture capture and council chambers, where presenters need a clear on-air indicator.

    Marshall positions the CV620 series for broadcast production, live events, houses of worship, education, courtrooms and government spaces, and this fits the specification well. In practice, Marshall CV620-WI2 PTZ camera works as a main camera for small studios, a side-angle unit in hybrid event rooms, a ceiling or wall-mounted source for worship streaming, or a controllable camera for university lecture capture. Power can be supplied by 12 V or PoE, and the Ethernet link can carry control, video, audio and tally in one cable run, which keeps installation cleaner in permanent AV racks and stage environments.

    Write your review

    Related Products ( 4 other products in the same category )